iSpring RCB3P 300 GPD Light Commercial Reverse Osmosis Water System W/Booster Pump and 20"x 2.5" Pre RO Filters
-6%
$629.99
$669.99
About this item
- For light commercial use in restaurants, labs, salons, etc. Feed Water Pressure: 22 - 95 psi
- The 20" x 2.5" pre RO filters provide up to 30,000 gallons of filtered water, twice as much as the industry standard 10" filters
- Three 100 GPD RO membranes combine to provide up to 300 gallons of reverse osmosis water per day
- Features a free-standing frame, booster pump, and a built-in pressure gauge
- Compatible with most pressurized storage tanks; tank not included
- Comes with 3/8" fittings
- Lifetime support from iSpring in Atlanta, Georgia; 678-261-7611
Frequently Bought Together
iSpring RCB3P 300 GPD Light Commercial Reverse Osmosis Water System W/Booster Pump and 20"x 2.5" Pre RO Filters
$629.99
-6%
$669.99
$669.99
- Availability: In Stock
- Model: RCB3P
- Manufacturer: iSpring
Write Review
James R. Shuster |
2017-09-16
Works great no issues so far and have produced or 1500 gals for a brewery...
2017-09-16
Works great no issues so far and have produced or 1500 gals for a brewery...
Anthony Solis II |
2021-03-12
I’ve had this device for a little while now. We had a big freeze come through and damaged some parts to my RO system due to extreme colds (temps we normally don’t get). I reached out to customer service and asked about replacement parts. They went above and beyond my expectations. Don and Adam have helped get me the right parts (even tho I’m sure I’ve been a pain) and for that I am thankful. I would definitely recommend their products. My ppm’s in my water dropped to 0 and have been going strong for awhile!
They are strong and durable (for the most part) and if something does go wrong, the customer service at ispring is top notch.
I will definitely continue to buy my products through this company.
2021-03-12
I’ve had this device for a little while now. We had a big freeze come through and damaged some parts to my RO system due to extreme colds (temps we normally don’t get). I reached out to customer service and asked about replacement parts. They went above and beyond my expectations. Don and Adam have helped get me the right parts (even tho I’m sure I’ve been a pain) and for that I am thankful. I would definitely recommend their products. My ppm’s in my water dropped to 0 and have been going strong for awhile!
They are strong and durable (for the most part) and if something does go wrong, the customer service at ispring is top notch.
I will definitely continue to buy my products through this company.
Derek Hartman |
2020-07-10
The 3/8” fitting claim is a little deceptive, as the only fitting that is 3/8” is the incoming water line, which helps but I’m not sure it does anything significant when it immediately goes back down to 1/4”, including for the drain and faucet lines. Other than that, the unit worked perfectly and was leak free out of the box. Provides great tasting water, under 20ppm, starting with ~325ppm city water. Haven’t tested the flow officially but I think the unit would get pretty close to 300gpd with good incoming city presssure, which we have. It filled our 14 gallon tank in under 30 minutes with 130-140psi on the gauge when running. I’m satisfied with that!! If you are looking for something a little more heavy duty than your standard under the sink setup, but keeping costs under $750 after tank purchase, this is it.
2020-07-10
The 3/8” fitting claim is a little deceptive, as the only fitting that is 3/8” is the incoming water line, which helps but I’m not sure it does anything significant when it immediately goes back down to 1/4”, including for the drain and faucet lines. Other than that, the unit worked perfectly and was leak free out of the box. Provides great tasting water, under 20ppm, starting with ~325ppm city water. Haven’t tested the flow officially but I think the unit would get pretty close to 300gpd with good incoming city presssure, which we have. It filled our 14 gallon tank in under 30 minutes with 130-140psi on the gauge when running. I’m satisfied with that!! If you are looking for something a little more heavy duty than your standard under the sink setup, but keeping costs under $750 after tank purchase, this is it.
Lavender |
2021-02-28
I bought the RCB 3P 300 GPD system in Oct 2020. The system has 3 RO membranes ,MC-1, each rated at 100 gpd RO output. The unit feeds a 200 gallon storage tank and separate pump for whole house use. We use between 100-250 gpd- the average is 150 gpd. The RO water comes out at 10 PPM . I added a calcite tank to improve the taste . Capture ratio C= 52% . Actual measured RO flow is 320gpd. After 4 months we have used a total of 18,000 RO gallons. I believe the iSpring MC-1 membranes should last to 24,000 gallons. This is a real whole house system and very reasonably priced. Be sure to change your 3 prefilters at 24,000 gallons into the system. This will prevent any chlorine from damaging the RO membranes. Don at iSpring customer support - support@123filter.com - helped me to increase capacity and flow. I added a 4th RO membrane which Increased output to from 320gpd to 430gpd (see photo). The pump runs fine at 122psi . I used the existing 450 restrictor. RO pure at 15 ppm. Capture ration is 55%. This iSpring unit is amazing! I call it the “Little Engine that Could!" Next I will try to increase capacity by using the 150 gpd membranes. Don at ISpring support has given me excellent support!
2021-02-28
I bought the RCB 3P 300 GPD system in Oct 2020. The system has 3 RO membranes ,MC-1, each rated at 100 gpd RO output. The unit feeds a 200 gallon storage tank and separate pump for whole house use. We use between 100-250 gpd- the average is 150 gpd. The RO water comes out at 10 PPM . I added a calcite tank to improve the taste . Capture ratio C= 52% . Actual measured RO flow is 320gpd. After 4 months we have used a total of 18,000 RO gallons. I believe the iSpring MC-1 membranes should last to 24,000 gallons. This is a real whole house system and very reasonably priced. Be sure to change your 3 prefilters at 24,000 gallons into the system. This will prevent any chlorine from damaging the RO membranes. Don at iSpring customer support - support@123filter.com - helped me to increase capacity and flow. I added a 4th RO membrane which Increased output to from 320gpd to 430gpd (see photo). The pump runs fine at 122psi . I used the existing 450 restrictor. RO pure at 15 ppm. Capture ration is 55%. This iSpring unit is amazing! I call it the “Little Engine that Could!" Next I will try to increase capacity by using the 150 gpd membranes. Don at ISpring support has given me excellent support!
Joshua Schmidt |
2020-05-27
My father installed this. It took him a few hours to install the RO system on his own, but he didn't have much trouble at all.
2020-05-27
My father installed this. It took him a few hours to install the RO system on his own, but he didn't have much trouble at all.
Patrick and Anna Dejean |
2020-03-23
It also has really good water pressure. I recommend this RO system for anyone!!
2020-03-23
It also has really good water pressure. I recommend this RO system for anyone!!
-
iSpring F3WCB32 2.5” x 20” Whole House Water Filter Replacement Set - One Sediment Cartridge and Two Carbon Block Cartridges - Fits WCB32C & WCB32O
$74.99
-
iSpring F7RB 5-Stage 20 inch Commercial RO 1-Year Supply, Fits RCB2P RCB3P
$95.99
-
iSpring F17RCB3P 5-Stage 20 inch 300GPD Commercial RO 2-Year Supply, Fits RCB3P
$278.99
-
iSpring RCS5T 500 GPD Residential and Light Commercial Tankless Reverse Osmosis Water Filter System with 1.5:1 Pure to Drain Ratio
$609.99
-
iSpring RCT600 Tankless High Output Versatile Portable Countertop Reverse Osmosis Water Filter System, 600 GPD RO Membrane, Fits Most Standard Faucet
$375.99
-
iSpring CRO1000 4-Stage Tankless Commercial Reverse Osmosis Drinking Water Filtration System for Restaurant and Small Business, 1000 GPD RO Membrane, 20-Inch Filters 3/4" NPT Inlet
$1,399.99
-
Start Download
RCB3P Manual