iSpring FC15 -10 CTO Carbon Block Filter Cartridge, 5 Microns, 9-3/4" x 2-7/8", White

  • Reduces fine sediment and chlorine taste and odor in residential and commercial Drinking water
  • Nominal filtration rating of 5 microns
  • Bonded Pac media with polyolefin pre-filter and polyethylene netting for extended life
  • Initial pressure drop of 3.4 psi at a flow rate of 1 gpm
  • Water temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
  • $17.20
    Qty:
        Eligible for FREE Shipping Orders Over $35 within US 48 cont. states Details    Print

    • Installation Step 1

      Remove the aerator if the faucet has one, and determine if your faucet has inner threads or outer threads.

    • Installation Step 2

      For faucets with internal threads, use the metal adapter and 2 sealing washers to connect the diverter valve to the faucet. For faucets with external threads, place the sealing washer into the diverter valve of the filter and connect to the faucet.

    • Installation Step 3

      Turn the diverter handle in line with the connector for regular tap water. Turn the diverter handle perpendicular to the connector for filtered water.

    • Installation Step 4

      To flush out the loose carbon, keep the faucet on for a couple of minutes until the filtered water runs clear.

    Product Description


    Color:White

    This iSpring FC15 carbon block CTO filter cartridge reduces fine sediment and chlorine taste and odor in drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 6,000 gallons at a flow rate of 1 gallon per minute (gpm). this cartridge is made of bonded powdered activated carbon (Pac) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The cartridge has an initial pressure drop of 3.4 pounds per square inch (psi) at a flow rate of 1 gallon per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees c). this carbon block filter cartridge meets national Sanitation foundation/American national standards institute (nsf/ansi) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.



    • Availability: In Stock
    • Model: FC15
    • Manufacturer: iSpring

    Write Review

    Note: Do not use HTML in the text.