iSpring FP15X50 5 Micron Box of 50 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 50-Pack

  • Made of 100% Melt-Blown Polypropylene, multi-layer filtration
  • Diameter 2.5" x 10" Length
  • 5 Micron - 50 filters included
  • Fits 10" filter housings
  • Tested by independent third-party to meet NSF/ANSI standard
  • $82.99
        Eligible for FREE Shipping Orders Over $35 within US 48 cont. states Details    Print Share on Facebook
    • iSpring Standard PP Sediment Filters

      Different water filters have different purposes. Some are designed to remove chemicals from water. Others remove metallic contaminants, dissolved solids, or charged particles. Polypropylene sediment filters are usually placed as the first stage of the water filtration system to remove suspended solids, variously referred to as turbidity, sediment, or particulate.

      PP sediment filters are widely used as beds of natural media like garnet, sand, and anthracite to filter out unwanted particles like dirt and iron rust.

      In general, flow rates for sediment filters are higher than equally sized carbon or media filters. The tighter the filter is, the slower the flow will be. iSpring provides a wide variety of micron sizes to suit your specific need.

    • iSpring sediment filters are compatible with most water filtration systems' housing on the market.

      • FP11: 10", 1 micron
      • FP15: 10", 5 micron
      • FP110: 10", 10 micron
      • FP120: 10", 20 micron
      • FP25: 20", 5 micron
      • FP15B: 10" Big Blue, 5 micron
      • FP25B: 20" Big Blue, 5 micron
      • FP220B: 20" Big Blue, 20 micron

    • Inner Spiral Pattern

      Evenly separated spiral pattern increases pressure resistant, filtration area, and water flow.

    • Multilayered Structure

      Sparse Layer: Large particles are filtered to extend the filter life.

      Compaction Layer: Made with fine fiber and filters smaller particles that passed through the sparse layer.

      Precision Layer: Small dust is filtered to assure efficiency of water filtration process in the following stages.

    • Material

      iSpring sediment filters are manufactured to comply strictly with FDA standard (CFR - Part 177) and tested by independent third party against NSF/ANSI standard for material safety and water quality. (NSF/ANSI 42, by NSF International, 10/2018)

    Product Description

    • It is usually the first filter in a water filtration system. The main function is for reduction of sediments, such as sand, dirt, silt, rust and various fine particles that even can't been seen by naked eyes. 100% MELT-BLOWN POLYPROPYLENE
    • Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. It is physically strong and resists to chemical and corrosion. Tested by independent third-party to meet NSF/ANSI standard
    • Well Packaged
    • Each cartridge is individually wrapped with manufacturing date Micron rating: 5 Micron Dimensions: 10" x 2.5" Capacity: 15,000 gallons Replacement schedule: 1-4 times a year, depending on the water quality.

    • Availability: In Stock
    • Model: FP15X50
    • Manufacturer: iSpring

    Write Review