iSpring WCB32O+AHPF12MNPT12X2 Whole House 3-Stage Water Filter System with Oversized Fine Sediment and Double Premium Carbon Block w/ 3/4 inch Push-Fit Braided Stainless Steel Hose Connectors and Ball Valve

  • Accepts 20” x 2.5” water filter cartridges. 3/4” NPT inlet/outlet; Purifies up to 35K gallons of water before filter replacement (6 month)
  • Feed Water Pressure: 40-95 psi; Feed Water Temperature: 40-100°F
  • Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. Two 12 inch 3/4'' MNPT X 3/4'' push-fit hoses are included to provide a hassle-free installation to any 3/4'' pipe, including Copper, PEX, or CPVC pipes. No welding or glue needed - just push in the pipe and it is locked in place. A removal tool is also included if you need to disconnect the system from the pipes.
  • Package includes - black metal bracket, three housings with caps, three filter cartridges, a housing wrench, two 3/4'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.
  • Lifetime support line 678-261-7611 from Alpharetta, GA USA
  • $209.99
    Qty:
    • Out of Stock | ETA: Feb/26/2019
    Print

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • Knocks out residual bad tastes and odors. Two CTOs combine to remove up to 99% of chlorine, and are highly effective on organic chemicals like pesticides, herbicides and industrial chemicals. (Tested by SGS)

    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WCB32 is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB22BM or WGB22B-PB earns its keep.
    If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB22BM or WGB22B-PB over the WGB22B or WGB21B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB22B or WGB21B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features

    • 30,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides half year of clean water for your entire family.

    • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS)

      • The WCB32 is equipped with back-to-back coconut shell carbon block filters. The densely packed carbon block filtration media provides more effective contaminant removal and longer filter life. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units).

      • Accepts 20” x 2.5” water filter cartridges 3/4” NPT inlet/outlet
        Purifies up to 35K gallons of water before filter replacement (6 month)
        Feed Water Pressure: 40-95 psi
        Feed Water Temperature: 40-100°F



    Product Description


    Style:All Blue housing w/ 3/4'' Push-Fit Hose Connectors and Ball Valve

    The WCB32 is equipped with back-to-back coconut shell carbon block filters. The densely packed carbon block filtration media provides more effective contaminant removal and longer filter life.
    • Availability: Out of Stock | ETA: Feb/26/2019
    • Model: WCB32O+AHPF12MNPT12X2

    Write Review

    Note: Do not use HTML in the text.