iSpring MC4 2.8" x 12" 400GPD Water Filter Replacement Cartridge Reverse Osmosis Membrane, fits RE4T

  • 400GPD Commercial Reverse Osmosis Membrane with Matching Housing
  • TFC (Thin Film Composite) membrane
  • Rejects wide spectrum of impurities down to .0001 micron
  • $142.99
        Eligible for FREE Shipping Orders Over $35 within US 48 cont. states Details    Print Share on Facebook
    Reverse Osmosis Membrane 2.8" x 12" - MC4 Not compatible with iSpring 400GPD tankless RO Model RCB4T system (it uses 2 of MC2, the 200GPD RO membranes)

    Product Features

    The key component of a COMMERCIAL Reverse Osmosis water filtration system, usually used in the 4th stage. It have very tiny holes, which allow only water and a few gases to pass through under certain pressure thus produce virtually pure water. The technology has been used in spaceships to recycle water for astronauts. It is effective in reducing hardness, heavy metals, toxins, free chlorine, bad taste, odor THM, and hazardous chemicals. Depending on inlet water quality or flow rate, it needs to be replaced every 24 months or 48,000 gallons of water.

    Product Highlights

    • Low-pressure membrane for commercial use
    • TFC (Thin Film Composite) membrane
    • Rejects wide spectrum of impurities down to .0001 micron
    • Tolerance to a wide range of operating conditions
    • Vacuum wrapped to keep freshness
    • Industry standard size that fits most commercial RO systems (2.8"x10")

    Specifications & Dimensions

    • Capacity: 400 gallons per day @ 50/60 psi & 77 deg F
    • Feed water pressure: 40 - 100 PSI
    • Feed water Temperature: 40 - 100(F)
    • Max. Total Dissolved Solids (TDS): 2000 ppm
    • Max. Hardness: 10 gpg
    • Max. Iron 0.2ppm
    • pH limits: 4 - 10
    • Length: 10", O.D. = 2.8"
    • 1/4" Fitting
    • Weight: 1.5 LBS
    • Availability: In Stock
    • Model: MC4
    • Manufacturer: iSpring
    There are no reviews for this product.

    Write Review