iSpring
![]()
View
- 2.5-Inch by 10-Inch
- Made of 100% Melt-Blown Polypropylene, multi-layer filtration
- 1 Micron
- Fits 10-Inch filter housings
- Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.
View
- Protect Your Family and Household Appliance from Chlorine and More: Say goodbye to smelly, bad tasting water! The FC25 carbon block filter is specially designed to remove up to 99% of chlorine from water as well as various other contaminants that c
View
Write Review
- Protect Your Family and Household Appliance from Chlorine and More: Say goodbye to smelly, bad tasting water! The FG25 granular activated carbon filter is specially designed to remove dust, particles, rust, and odors and tastes caused by various co
View
- Individually wrapped
- 5 micron rating
- Made from coconut shell carbon
- Fits 10 inch standard filter housings
- Removes chlorine, bad odor and taste
View
- Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
- Rated at 5 microns
- Bonded Pac media with polyolefin pre-filter and polyethylene netting
- Initial pressure drop of 3.4 psi at a flow rate of
View
- Lead-free non-air gap drinking water faucet for Reverse Osmosis Systems and undersink water filter systems. Built from solid brass, this 9.75-inch RO faucet delivers clean and fresh water to you and your family.
- Your choice for drinking w
View
- Product parameters: 1/4 inch fitting. Voltage: 24 volts. Inlet pressure: 15 - 50 psi.
- This iSpring PMP5 booster pump can be mounted in several positions, such as Reverse Osmosis systems, etc. to increase the water pressure.
View
- Fits iSpring HW12, HC12, RCC and RCCP series filter and membrane housing, US31, CKC series, and CT10 series
- Made from solid plastic
View
Write Review
- The o-rings are 5.8” in diameter and fit iSpring WGB32B series and WGB22B series whole house water filtration systems.
- Peace of Mind Customer Service: Register online to activate your manufacturer warranty and life-time free tech support.
Out of Stock
$23.99
View
- Standard Size for Whole House Water Filter Systems with 4.5” Filters: The wrench works with iSpring Whole House Water Filters. It is also compatible with most whole house housings that hold 4.5” (dia) filters in the market.
- The wrench is
View
Write Review
- Water Pressure Gauge, 6 bar, 90 PSI
- Connect a piece of hose to the gauge
- Attach the other end to your tap
- Turn the water on fully
- Read the pressure as simple as that!
View
- The wrench works with the RO membrane housings of iSpring RCC7 series, RO100, PH100 under sink reverse osmosis systems.
- The wrench is made of solid plastic and contains 12 teeth that enable a firm grab.
- Peace of Mind Custom
View
- Produces great tasting drinking water filtered right from your kitchen tap; Effectively reduces sediment, PFAS, chlorine, and more by letting water pass through the countertop water filter
- No hassle faucet adapter makes installation and remova
View
- Lead-free non-air gap drinking water faucet for Reverse Osmosis Systems and undersink water filter systems. Built from solid brass, this 9-inch RO faucet delivers clean and fresh water to you and your family.
- Your choice for drinking wate
View
- Lead-free non-air gap drinking water faucet for Reverse Osmosis Systems and undersink water filter systems. Built from solid brass, this 9.5-inch RO faucet delivers clean and fresh water to you and your family.
- Your choice for drinking wa
View
- CLEAR HOUSING - See-through housing allows you to visually inspect the filter and know when it's time for a filter change
- ULTRA SAFE - Includes a standard 5 micron Carbon Block Cartridge that removes 95% of chlorine, odors, sand, silt, sedimen
View
- Made of 100% Melt-Blown Polypropylene, multi-layer filtration. This filter can also be used for pool and hottub.
- Diameter 2.5" x 10" Length
- 5 Micron - 50 filters included
- Fits 10" filter housings
- Tested by independent third-part
View
- Made of 100% Melt-Blown Polypropylene, multi-layer filtration
- 2.5" DIA x 10" Length
- 50 Micron rated
- Fits 10" filter housings
- Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.<
View
Write Review
- Made of 100% Melt-Blown Polypropylene, multi-layer filtration
- 2.5" DIA x 10" Length
- 20 Micron rated
- Fits 10" filter housings
- Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.<
View
- Certified to NSF/ANSI 58
- This Reverse Osmosis water filter system removes up to 99% of over 1,000 contaminants like PFAS, vinyl chloride, chlorine, fluoride, lead (removes up to 98%), arsenic, asbestos, calcium, sodium and more.
iSpring FP11X50 1 Micron Box of 50 10"x2.5" Standard Sediment Water Filter Replacement, 50-Pack (FP11X50)
2.5-Inch by 10-Inch Made of 100% Melt-Blown Polypropylene, multi-layer filtration 1 Micron Fits 10-Inch filter housings Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.
iSpring FC25 High Capacity 20” x 2.5” Water Filter Replacement Cartridges - CTO Carbon Block - Fits WCB32C, WCB32O, and RCB3P (FC25)
Protect Your Family and Household Appliance from Chlorine and More: Say goodbye to smelly, bad tasting water! The FC25 carbon block filter is specially designed to remove up to 99% of chlorine from water as well as various other contaminants that cause unpleasant odors and tastes.
Standard Size: Our filter set fits standard 20” x 2.5” housings, including brand name models.
Our FC25 CTO Carbon Block filters are made of coconut shell carbon to increase filtration efficiency and extend filter life. They are tested by an independent third-party to meet NSF/ANSI standards. The filters have a capacity of 30,000 gallons of water, enough to supply a family of four with clean water for half a year. Water flow: up to 12 GPM.
Peace of Mind Customer Service: Register online to activate your extended manufacturer warranty and life-time free tech support from U.S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS). If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring FG25 20” x 2.5” Water Filter Replacement Cartridges - Granular Activated Carbon - Fits RCB3P RO System and other 20” x 2.5” Systems (FG25)
Protect Your Family and Household Appliance from Chlorine and More: Say goodbye to smelly, bad tasting water! The FG25 granular activated carbon filter is specially designed to remove dust, particles, rust, and odors and tastes caused by various contaminants, especially chlorine from your source water.
Standard Size: Our filter set fits standard 20” x 2.5” housings, including brand name models.
Our FG25 granular activated carbon filters are made of coconut shell carbon to increase filtration efficiency and extend filter life. They are tested by an independent third-party to meet NSF/ANSI standards. The filters have a capacity of 30,000 gallons of water, enough to supply a family of four with clean water for half a year. Water flow: up to 12 GPM.
Peace of Mind Customer Service: Register online to activate your extended manufacturer warranty and life-time free tech support from U.S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS). If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
iSpring FG15 GAC Granular Activated Carbon 2.5"x10" Water Filter Replacement, 2.5" x 10" (FG15)
Individually wrapped
5 micron rating
Made from coconut shell carbon
Fits 10 inch standard filter housings
Removes chlorine, bad odor and taste
iSpring FC15 Standard 10 inch CTO Carbon Block Water Filter Cartridge Replacement, 5 Microns (FC15)
Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
Rated at 5 microns
Bonded Pac media with polyolefin pre-filter and polyethylene netting
Initial pressure drop of 3.4 psi at a flow rate of 1 gpm
Water temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)
iSpring GS3 Lead-Free Reverse Osmosis Water Filter Drinking Water Faucet, Non-Air Gap RO Faucet, Chrome Finish (GS3)
Lead-free non-air gap drinking water faucet for Reverse Osmosis Systems and undersink water filter systems. Built from solid brass, this 9.75-inch RO faucet delivers clean and fresh water to you and your family.
Your choice for drinking water faucet if you prefer the look of a traditional RO faucet. Timeless coke-shaped style with high grade chrome finish makes it easy to match other fixtures in your kitchen.
Swivels 360-degree for ease of use. Featured durable ¼ turn wheel-shaped handle offers smooth operation.
Requires only a ½” drilled hole for easy installation; can accommodate larger pre-drilled holes with its cover plate(OD: 2.1”). One ¼” and one ¼” to ⅜” tube push to connect quick fitting included.
Backed by a 30-day money-back guarantee, 3-year limited manufacturer warranty, and lifetime tech support from iSpring Water Systems at (678)261-7611 in Atlanta, GA.
iSpring PMP5 Booster Pump for 75 GPD, 100 GPD Reverse Osmosis Water Filter System, Black (PMP5)
Product parameters: 1/4 inch fitting. Voltage: 24 volts. Inlet pressure: 15 - 50 psi.
This iSpring PMP5 booster pump can be mounted in several positions, such as Reverse Osmosis systems, etc. to increase the water pressure.
Compatibility: The pump works with 75 GPD and 100 GPD Reverse Osmosis systems.
Please note: Transformer is not included. If you need a transformer, please search iSpring ATRF5.
If you want to add the booster pump to the RO system, you may also need other accessories to automatically turn on / off the system, such as the Low- & High-Pressure Switch, Feed Water Solenoid Valve, Auto Flush Solenoid Valve, and a Transformer.
iSpring AWR2 2-in-1 Reverse Osmosis Pre-Filter Housing and RO Membrane Canister Wrench (AWR2)
Fits iSpring HW12, HC12, RCC and RCCP series filter and membrane housing, US31, CKC series, and CT10 series
Made from solid plastic
iSpring ORBX2 Replacement O-ring for WGB32B Series and WGB22B Series Whole House Water Filtration Systems - Pack of 2 (ORBX2)
The o-rings are 5.8” in diameter and fit iSpring WGB32B series and WGB22B series whole house water filtration systems.
Peace of Mind Customer Service: Register online to activate your manufacturer warranty and life-time free tech support. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please note: The o-rings are for iSpring WGB32 series, WGB22 series, and WGB12B whole house water filtration systems only. If you need replacement o-rings for reverse osmosis (RO) pre-filter housings, please consider iSpring ORFX3. If you need replacement o-rings for WGB21B series, WGB12B, and WDS series whole house water filters, please consider iSpring ORB1.
Out of Stock
$23.99
iSpring AWR3 Filter Housing Wrench for Whole House Water Filtration Systems with 4.5” Filters (AWR3)
Standard Size for Whole House Water Filter Systems with 4.5” Filters: The wrench works with iSpring Whole House Water Filters. It is also compatible with most whole house housings that hold 4.5” (dia) filters in the market.
The wrench is made of solid plastic and contains 4 teeth that enable a firm grab.
Peace of Mind Customer Service: Register online to activate your manufacturer warranty and life-time free tech support. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Please note: The wrench is for whole house filter housings only and does not fit RO housings. If you need a wrench for reverse osmosis systems, please consider iSpring AWR1 (for RO membrane housings), AWR2 (for RO pre-filter housings), or AWR5N1 (for both).
iSpring APG6 Pressure Gauge (APG6)
Water Pressure Gauge, 6 bar, 90 PSI Connect a piece of hose to the gauge Attach the other end to your tap Turn the water on fully Read the pressure as simple as that!
iSpring AWR1 RO Membrane Housing Wrench for Reverse Osmosis (RO) Water Filtration Systems (AWR1)
The wrench works with the RO membrane housings of iSpring RCC7 series, RO100, PH100 under sink reverse osmosis systems.
The wrench is made of solid plastic and contains 12 teeth that enable a firm grab.
Peace of Mind Customer Service: Register online to activate your manufacturer warranty and life-time free tech support. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
Note: the wrench is for RO membrane housings ONLY and does not fit pre-filter RO filter housings. If you need a wrench for RO filter housings, please consider iSpring AWR2 or AWR5N1.
iSpring CKC2 2-Stage Countertop Water Filtration Dispenser System- Includes Activated Carbon and Carbon Block Filters (CKC2)
Produces great tasting drinking water filtered right from your kitchen tap; Effectively reduces sediment, PFAS, chlorine, and more by letting water pass through the countertop water filter
No hassle faucet adapter makes installation and removal a breeze; Sleek and efficient design offers a natural look on any counter. The countertop water filter is an ideal choice for homes, apartments, dorms, and anywhere a faucet is available
Multi-Stage Filtration cartridges (activated carbon filter FG15 and carbon block filter FC15) offer the same benefits as larger systems
Please Note: Unlike an RO membrane, this countertop water filtration system DOES NOT reduce Total Dissolved Solids (TDS). Instead this filter keeps healthy minerals in your water while removing harmful chemicals. If you are interested in a filter that removes TDS, please consider our iSpring tankless under sink Reverse Osmosis (RO) system RO500 or countertop RO water filter system RCT600.
100% SATISFIED CUSTOMERS: Extended manufacturer with lifetime personalized support.
iSpring GB1 Lead-Free Reverse Osmosis Drinking Water Filter, Standard Non-Air Gap RO Faucet, Chrome (GB1)
Lead-free non-air gap drinking water faucet for Reverse Osmosis Systems and undersink water filter systems. Built from solid brass, this 9-inch RO faucet delivers clean and fresh water to you and your family.
Your choice for drinking water faucet if you prefer the standard look of a traditional RO faucet. Timeless style with high-grade chrome finish makes it easy to match other fixtures in your kitchen.
Long-reach(6”) design provides extra room underneath the spout for ease of use. Durable black handle offers smooth push-down operation.
Requires only a ½” drilled hole for easy installation; can accommodate larger pre-drilled holes with its cover plate(OD: 2.1”). One ¼” and one ¼” to ⅜” tube push to connect quick fitting included.
Backed by a 30-day money-back guarantee, 3-year limited manufacturer warranty, and lifetime tech support from iSpring Water Systems at (678)261-7611.
iSpring GS1 Lead-Free Reverse Osmosis Water Filter Drinking Water Faucet, Non-Air Gap Single Lever Handle RO Faucet, Chrome Finish (GS1)
Lead-free non-air gap drinking water faucet for Reverse Osmosis Systems and undersink water filter systems. Built from solid brass, this 9.5-inch RO faucet delivers clean and fresh water to you and your family.
Your choice for drinking water faucet if you prefer the look of a traditional RO faucet. Timeless coke-shaped style with high grade chrome finish makes it easy to match other fixtures in your kitchen.
Swivels 360-degree for ease of use. Durable ¼ turn single lever handle offers smooth operation.
Requires only a ½” drilled hole for easy installation; can accommodate larger pre-drilled holes with its cover plate(OD: 2.1”). One ¼” push to connect quick fitting included.
Backed by a 30-day money-back guarantee, 3-year limited manufacturer warranty, and lifetime tech support from iSpring Water Systems at (678)261-7611 in Atlanta, GA.
iSpring CKC1C Countertop water filter, Clear Housing with Carbon (CKC1C)
CLEAR HOUSING - See-through housing allows you to visually inspect the filter and know when it's time for a filter change
ULTRA SAFE - Includes a standard 5 micron Carbon Block Cartridge that removes 95% of chlorine, odors, sand, silt, sediment and rust from your drinking water. Tested by independent third-party to meet NSF/ANSI Standards.
EASY INSTALLATION - No drilling required. Portable and easy to install. Sleek and efficient design offers a natural look on any counter. Perfect for small spaces.
COMPLETE FILTRATION - A standard 10 inch CTO cartridge, a plastic wrench, two faucet adapters, tubing and O-ring included for a leak-free install.
LOW MAINTENANCE - It is recommended to replace the filters (FC15) every 6 months.
PLEASE NOTE - Unlike an RO membrane, this countertop water filtration system DOES NOT reduce Total Dissolved Solids (TDS). Instead this filter keeps healthy minerals in your water while removing harmful chemicals. If you are interested in a filter that removes TDS, please consider our iSpring tankless under sink Reverse Osmosis (RO) system RO500 or countertop RO water filter system RCT600.
TOP-NOTCH SUPPORT - 30 day money back guarantee, 1 year limited warranty and lifetime technical support from Atlanta, Georgia.
iSpring FP15X50 5 Micron Box of 50 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 50-Pack (FP15X50)
Made of 100% Melt-Blown Polypropylene, multi-layer filtration. This filter can also be used for pool and hottub.
Diameter 2.5" x 10" Length
5 Micron - 50 filters included
Fits 10" filter housings
Tested by independent third-party to meet NSF/ANSI standard
iSpring FP150X50 50 Micron Box of 50 10"x2.5" Standard Sediment Water Filter Replacement Cartridges, 50-Pack (FP150X50)
Made of 100% Melt-Blown Polypropylene, multi-layer filtration 2.5" DIA x 10" Length 50 Micron rated Fits 10" filter housings Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.
iSpring FP120X50 20 Micron Box of 50 Standard 10"x2.5" Sediment Water Filter Replacement, 50-Pack (FP120X50)
Made of 100% Melt-Blown Polypropylene, multi-layer filtration 2.5" DIA x 10" Length 20 Micron rated Fits 10" filter housings Tested by independent third-party to meet NSF/ANSI standard. This filter can also be used for pool and hottub.
iSpring RCC7 5-Stage Under Sink Reverse Osmosis Water Filter System, 75 GPD, NSF Certified (RCC7)
Certified to NSF/ANSI 58
This Reverse Osmosis water filter system removes up to 99% of over 1,000 contaminants like PFAS, vinyl chloride, chlorine, fluoride, lead (removes up to 98%), arsenic, asbestos, calcium, sodium and more.
The RO water system is equipped with the quality components, which ensures reliability and low maintenance for many years to come.
Clear see-through 1st stage housing makes water filter inspection a snap.
The reverse osmosis system features European-designed brushed nickel all-metal faucet and clear see-through 1st stage housing.
Do-it-yourself installation, typically in a couple of hours to install the Reverse Osmosis water system with industry-leading help just a phone call away. This reverse osmosis filter fits under a standard kitchen sink, with all parts included and well-organized instructions and videos. For leak-free installation, simply push tubing ½ inch deep into quick-fitting connectors and lock - no threading pipes needed.
All the iSpring RO systems are backed by a 1-year Manufacturer Warranty with lifetime support line 678-261-7611 from Atlanta, GA USA.