Big Blue Water Filters

Sort By:  
$119.99
$159.99
$219.99
$209.99
$509.99
$469.99
$165.99
$509.99
$564.99
$469.99
$399.99
$329.99
$452.99
$384.99
$399.99
$564.99
$519.99
iSpring 1-Stage Whole House Big Blue Filter with CTO Carbon Block Filter, 4.5X20 in. Big Blue, 1-in NPT Ports (WGB12B)

Product Features

  • Effective in purifying water for the whole house
  • Removes a wide range of contaminants
  • Single Stages of filtration in 20" BIG blue housings that preserves water pressure
  • Easy installation- 1" inlet/outlet for big flow and easy installation on a cold water line
  • Built-in Pressure Release Valve (allows for release of built-up pressure when changing filters)
  • Standard replacement cartridges 4.5" x 20" (one set included: 1 CTO Carbon).
  • Opening spanner (for 20" Big blue filter housings)
  • What's included

    1st Stage 5 micron 20"x4.5" high-grade Coconut Carbon Block filter -- removes sand, silt, sediment, and chlorine. Tested by independent third-party to meet NSF/ANSI Standard. ( order info )
    Installation Hardware Wrench and manuals

    Specifications & Dimensions

  • Water Source: Chlorinated or non-chlorinated water supplies
  • System Capacity: 500 gallons per day @ 50/60 psi & 77 deg F
  • Feed Water pH: 3.0 -11.0
  • Feed Water Pressure: 40-90 psi
  • Feed Water Temperature: 40-100 F (4 - 38 C)
  • Max Total Dissolved Solids: 2500 ppm
  • System Dimensions(inch): 8w x 8d x 23.5h
  • System Package Dimensions(inch): 10w x 10d x 26.4h
  • System Package Weight : 31 lbs
  • Notes

  • For filter cartridge replacement schedule and price, see Replacement .
  • <li>Single Stages of filtration in 20" BIG blue housings that preserves water pressure<li>Features Taste & Odor Reducing for your whole house<li>Removes a wide range of contaminants
    $119.99
    iSpring Whole House 3-Stage Water Filter System with Oversized Fine Sediment and Double Premium Carbon Block, WCB32O (WCB32O)

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • Knocks out residual bad tastes and odors. Two CTOs combine to remove up to 99% of chlorine, and are highly effective on organic chemicals like pesticides, herbicides and industrial chemicals. (Tested by SGS)

    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WCB32 is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB22BM or WGB22B-PB earns its keep.
    If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB22BM or WGB22B-PB over the WGB22B or WGB21B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB22B or WGB21B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features

    • 30,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides half year of clean water for your entire family.

    • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS)

      • The WCB32 is equipped with back-to-back coconut shell carbon block filters. The densely packed carbon block filtration media provides more effective contaminant removal and longer filter life. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units).

      • Accepts 20” x 2.5” water filter cartridges 3/4” NPT inlet/outlet
        Purifies up to 35K gallons of water before filter replacement (6 month)
        Feed Water Pressure: 40-95 psi
        Feed Water Temperature: 40-100°F



    Product Features

    • New Features: 3/4" NPT fittings and connections;
    • Effective in purifying drinking water instantly!
    • Removes a wide range of contaminants
    • Three Stages of filtration in 20" housings
    • Easy installation
    • 3/4" in & out for big flow
    • Pressure release valve (allows for release of built-up pressure when changing filters)
    • Mounting bracket
    • Standard replacement cartridges 2.5" x 20" (one set of three is already included: 1 Sediment + 2 CTO Carbon).
    • Opening spanner (for 20" filter housings)

    What's included

    1st Stage5 micron 20" high-capacity polypropylene sediment filter #FP25 -- removes dust, particles, and rust. Tested by independent third-party to meet NSF/ANSI Standard. (order info)
    2nd StageCarbon Block 5 micron 20" #FC25 -- gets rid of unpleasant chlorine, tastes and odors, cloudiness and colors. Tested by independent third-party to meet NSF/ANSI Standard. (order info)
    3rd StageCarbon Block 5 micron 20" #FC25 -- gets rid of unpleasant chlorine, tastes and odors, cloudiness and colors. Tested by independent third-party to meet NSF/ANSI Standard. (order info)
    Installation HardwareWrench and manuals

    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supplies
    • System Capacity: 500 gallons per day @ 50/60 psi & 77 deg F
    • Feed Water pH: 3.0 -11.0
    • Feed Water Pressure: 40-95 psi
    • Feed Water Temperature: 40-100 F (4 - 38 C)
    • Max Total Dissolved Solids: 2500 ppm
    • System Package Dimensions(inch): 17w x 7d x 26.4h
    • System Package Weight : 28 lbs
    • UPC: 662425090631

    Notes

    • For filter cartridge replacement schedule and price, see Replacement.
    <li>Oversized Fine Sediment and Double Premium Carbon Block<li>Effective in purifying drinking water instantly!<li>Three Stages of filtration in 20" housings<li>3/4" in & out for big flow.<li>Removes a wide range of contaminants.<li>Standard replacement cartridges 2.5" x 20"
    $159.99
    iSpring Whole House 3-Stage Water Filter System with Oversized Fine Sediment and Double Premium Carbon Block w/ 3/4 inch Push-Fit Braided Stainless Steel Hose Connectors and Ball Valve (WCB32+AHPF12MNPT12X2)

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • Knocks out residual bad tastes and odors. Two CTOs combine to remove up to 99% of chlorine, and are highly effective on organic chemicals like pesticides, herbicides and industrial chemicals. (Tested by SGS)

    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WCB32 is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB22BM or WGB22B-PB earns its keep.
    If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB22BM or WGB22B-PB over the WGB22B or WGB21B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB22B or WGB21B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features

    • 30,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides half year of clean water for your entire family.

    • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS)

      • The WCB32 is equipped with back-to-back coconut shell carbon block filters. The densely packed carbon block filtration media provides more effective contaminant removal and longer filter life. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units).

      • Accepts 20” x 2.5” water filter cartridges 3/4” NPT inlet/outlet
        Purifies up to 35K gallons of water before filter replacement (6 month)
        Feed Water Pressure: 40-95 psi
        Feed Water Temperature: 40-100°F



    Product Features

    • New Features: 3/4" NPT fittings and connections; Clear housing on first stage
    • Effective in purifying drinking water instantly!
    • Removes a wide range of contaminants
    • Three Stages of filtration in 20" housings
    • Easy installation
    • 3/4" in & out for big flow
    • Pressure release valve (allows for release of built-up pressure when changing filters)
    • Mounting bracket
    • Standard replacement cartridges 2.5" x 20" (one set of three is already included: 1 Sediment + 2 CTO Carbon).
    • Opening spanner (for 20" filter housings)

    What's included

    1st Stage5 micron 20" high-capacity polypropylene sediment filter #FP25 -- removes dust, particles, and rust. Tested by independent third-party to meet NSF/ANSI Standard. (order info)
    2nd StageCarbon Block 5 micron 20" #FC25 -- gets rid of unpleasant chlorine, tastes and odors, cloudiness and colors. Tested by independent third-party to meet NSF/ANSI Standard. (order info)
    3rd StageCarbon Block 5 micron 20" #FC25 -- gets rid of unpleasant chlorine, tastes and odors, cloudiness and colors. Tested by independent third-party to meet NSF/ANSI Standard. (order info)
    Installation HardwareWrench and manuals, black metal bracket, three housings with caps, three filter cartridges, a housing wrench, two 3/4'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.

    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supplies
    • System Capacity: 500 gallons per day @ 50/60 psi & 77 deg F
    • Feed Water pH: 3.0 -11.0
    • Feed Water Pressure: 40-95 psi
    • Feed Water Temperature: 40-100 F (4 - 38 C)
    • Max Total Dissolved Solids: 2500 ppm
    • System Package Dimensions(inch): 17w x 7d x 26.4h
    • System Package Weight : 28 lbs

    Notes

    • For filter cartridge replacement schedule and price, see Replacement.
    <li>Accepts 20” x 2.5” water filter cartridges. 3/4” NPT inlet/outlet; Purifies up to 35K gallons of water before filter replacement (6 month) <li>Two 12 inch 3/4'' MNPT X 3/4'' push-fit hoses are included to provide a hassle-free installation to any 3/4'' pipe, including Copper, PEX, or CPVC pipes. <li>No welding or glue needed - just push in the pipe and it is locked in place. A removal tool is also included if you need to disconnect the system from the pipes. <li>Feed Water Pressure: 40-95 psi; Feed Water Temperature: 40-100°F <li>Package includes - black metal bracket, three housings with caps, three filter cartridges, a housing wrench, two 3/4'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool. <li>Lifetime support line 678-261-7611 from Alpharetta, GA USA
    $219.99
    iSpring Whole House 3-Stage Water Filter System with Oversized Fine Sediment and Double Premium Carbon Block w/ 3/4 inch Push-Fit Braided Stainless Steel Hose Connectors and Ball Valve (WCB32O+AHPF12MNPT12X2)

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • Knocks out residual bad tastes and odors. Two CTOs combine to remove up to 99% of chlorine, and are highly effective on organic chemicals like pesticides, herbicides and industrial chemicals. (Tested by SGS)

    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WCB32 is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB22BM or WGB22B-PB earns its keep.
    If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB22BM or WGB22B-PB over the WGB22B or WGB21B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB22B or WGB21B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features

    • 30,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides half year of clean water for your entire family.

    • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS)

      • The WCB32 is equipped with back-to-back coconut shell carbon block filters. The densely packed carbon block filtration media provides more effective contaminant removal and longer filter life. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units).

      • Accepts 20” x 2.5” water filter cartridges 3/4” NPT inlet/outlet
        Purifies up to 35K gallons of water before filter replacement (6 month)
        Feed Water Pressure: 40-95 psi
        Feed Water Temperature: 40-100°F



    Product Features

    • New Features: 3/4" NPT fittings and connections;
    • Effective in purifying drinking water instantly!
    • Removes a wide range of contaminants
    • Three Stages of filtration in 20" housings
    • Easy installation
    • 3/4" in & out for big flow
    • Pressure release valve (allows for release of built-up pressure when changing filters)
    • Mounting bracket
    • Standard replacement cartridges 2.5" x 20" (one set of three is already included: 1 Sediment + 2 CTO Carbon).
    • Opening spanner (for 20" filter housings)

    What's included

    1st Stage5 micron 20" high-capacity polypropylene sediment filter #FP25 -- removes dust, particles, and rust. Tested by independent third-party to meet NSF/ANSI Standard. (order info)
    2nd StageCarbon Block 5 micron 20" #FC25 -- gets rid of unpleasant chlorine, tastes and odors, cloudiness and colors. Tested by independent third-party to meet NSF/ANSI Standard. (order info)
    3rd StageCarbon Block 5 micron 20" #FC25 -- gets rid of unpleasant chlorine, tastes and odors, cloudiness and colors. Tested by independent third-party to meet NSF/ANSI Standard. (order info)
    Installation HardwareWrench and manuals, black metal bracket, three housings with caps, three filter cartridges, a housing wrench, two 3/4'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.

    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supplies
    • System Capacity: 500 gallons per day @ 50/60 psi & 77 deg F
    • Feed Water pH: 3.0 -11.0
    • Feed Water Pressure: 40-95 psi
    • Feed Water Temperature: 40-100 F (4 - 38 C)
    • Max Total Dissolved Solids: 2500 ppm
    • System Package Dimensions(inch): 17w x 7d x 26.4h
    • System Package Weight : 28 lbs
    • UPC: 662425090631

    Notes

    • For filter cartridge replacement schedule and price, see Replacement.
    <li>Accepts 20” x 2.5” water filter cartridges. 3/4” NPT inlet/outlet; Purifies up to 35K gallons of water before filter replacement (6 month) <li>Feed Water Pressure: 40-95 psi; Feed Water Temperature: 40-100°F <li>Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. <li>Two 12 inch 3/4'' MNPT X 3/4'' push-fit hoses are included to provide a hassle-free installation to any 3/4'' pipe, including Copper, PEX, or CPVC pipes. <li>No welding or glue needed - just push in the pipe and it is locked in place. A removal tool is also included if you need to disconnect the system from the pipes. <li>Package includes - black metal bracket, three housings with caps, three filter cartridges, a housing wrench, two 3/4'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool. <li>Lifetime support line 678-261-7611 from Alpharetta, GA USA
    $209.99
    iSpring WGB32BM - 3-Stage Whole House Water Filtration System w/ Iron & Manganese Reducing Filter (WGB32BM)

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • iSpring iron manganese filter efficiently reduces iron (3.0 -> 0.01 ppm) and manganese (1.0 -> 0.01 ppm) and lasts up to 3 times longer than greensand.
      Filtration Capacity: 50k gal at 3.0ppm for iron.

    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32BM whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB32B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB32BM or WGB32B-PB earns its keep. If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB32BM or WGB32B-PB over the WGB32B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB32B fits the bill.


    Q: How does this filter remove iron in the water? Does 6ppm to 0.01ppm apply to any water source?
    A: It depends on the quality of the source water. If the source water has a higher level of hardness, normally with TDS higher than 700, the resin in the filter could be saturated by Calcium, Lead, Magnesium and other cations, and would not be able to remove iron and manganese effectively. In this case, please install it behind a Water Softener that can either remove or neutralize these cations first in order to extend the lifespan of this FM25B iron manganese removal filter.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.


    Highlight Features

      • 100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.

      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals, heavy metals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)

    • The WGB32BM is equipped with an iron and manganese filter, removing up to 99% of both contaminants. The filter is also capable of greatly reducing arsenic, however this will vary depending on the specific isotope. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)


    <UL> <li>Equipped with gradient three stage filtration, iSpring WGB32BM whole house water system removes sediment, chlorine, Iron, Manganese, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. With 1 inch NPT inlet/ outlet, it has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance. <li>Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. In addition to the basic features of sediment, chlorine and odor removal, this system also excels in the reduction of iron and manganese residue to protect your home appliances, such as the dishwasher and washing machine. <li>Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), thus it keeps the healthy minerals in the water. <li>The first stage high capacity polypropylene sediment filter achieves filtration down to 5 microns. The second stage CTO Carbon Block filter uses high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by independent third-party to meet NSF/ANSI Standards. Both filters have a capacity of 100,000 gallon of water to supply one full year of clean water for a family of four. <li>The last stage FM25B iron and manganese removal filter efficiently reduces iron (3.0 -> 0.01 ppm) and manganese (1.0 -> 0.01 ppm), and lasts up to 3 times longer than greensand because the catalytic media is not being consumed in the process. </UL>
    $509.99
    iSpring WGB32B 3-Stage Whole House Water Filtration System w/Big Blue Sediment and Carbon Block Filters (WGB32B)

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • Knocks out residual bad tastes and odors. Two CTOs combine to remove over 99% of chlorine, and are highly effective on organic chemicals like pesticides, herbicides and industrial chemicals.

    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB32B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB32BM or WGB32B-PB earns its keep. If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB32BM or WGB32B-PB over the WGB32B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB32B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features

      • 100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.

      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)

      • The WGB32B is equipped with back-to-back coconut shell carbon block filters. The densely packed carbon block filtration media provides more effective contaminant removal and longer filter life. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)


        • Accepts 20” x 4.5” water filter cartridges 1” NPT inlet/outlet
          Purifies up to 100K gallons of water before filter replacement (1 year)
          Feed Water Pressure: 40-100 psi
          Feed Water Temperature: 40-100°F



    Product Summary

      The iSpring 3-stage WGB32B whole house filtration system combines sediment and dual CTO carbon block filters to deliver clean, clear water to every faucet and bath in your home.

    Product Features

    • Oversized filters improve flow rate and reduce maintenance frequency.
    • Excellent purification - removes up to 95% of sediment, chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, and many other contaminants that create foul tastes, stains, and odors.
    • Dual gradient density sediment filter provides sediment filtration down to 5 microns.
    • Two 5 micron coconut shell CTO carbon block filters.
    • Solid filter housings with 1 inch NPT female ports allow for the strongest water pressure possible - up to 15 gallons per minute.
    • Low cost, 4.5" x 20" non-proprietary standard replacement cartridges (one set of three is already included: 1 Sediment + 2 CTO Carbon Blocks).
    • Lifetime technical support from iSpring at 678-261-7611 or sales@ispringfilter.com.
    • Note: System variants for removing contaminants such as iron, lead, manganese, and other heavy metals are also available: WGB32B variants

    What's Included:

    1st Stage

    4.5" x 20" 5 Micron High-Capacity Polypropylene Sediment Filter (FP25B): Removes dust, particles, rust, and other sediments. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    2nd Stage

    4.5" x 20" 5 Micron CTO Carbon Block Filter (FC25B): Removes chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, volatile organic chemicals (VOCs), and various other contaminants. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    3rd Stage

    4.5" x 20" 5 Micron CTO Carbon Block Filter (FC25B): Further removes chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, volatile organic chemicals (VOCs), and various other contaminants. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    Installation Hardware

    Filter housing wrench and user manual.


    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supply
    • Inlet/Outlet: 1.0 inch female NPT
    • System Capacity: 100,000 Gal
    • Flow Rate: 3 - 15 GPM
    • Feed Water pH: 3.0 - 11.0
    • Feed Water Pressure: 40 - 80 psi
    • Approximate PSI drop from input to output: 5 PSI
    • Feed Water Temperature: 40 - 100 F (4 - 38 C)
    • Max Total Dissolved Solids (TDS): 2000 ppm
    • System Dimensions: 27" H x 21" W x 8" D
    • System Package Weight : 40 lbs

    Note


    • Check to see whether your electrical panel has its ground wire attached to the pipe or to a rod driven into the ground. If the ground wire is attached to the pipe, you will need to add a jumper cable to restore an important safety feature that prevents the filter from interrupting the ground path.
    • Install grounding clamps on either side of the filter and run a thick wire from clamp to clamp and secure tightly.
    <li>Equipped with gradient three stage filtration, iSpring WGB32B whole house water system removes sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. With 1 inch NPT inlet/ outlet, it has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance. <li>Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house.. Big Blue 20inches x 4.5inches filter cartridges allow for minimal pressure reduction and extended filter life <li>Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), thus it keeps the healthy minerals in the water. <li>The first stage high capacity polypropylene sediment filter achieves filtration down to 5 microns. The second and third stage CTO Carbon Block filter uses high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by independent third-party to meet NSF/ANSI Standards. Both filters have a capacity of 100,000 gallon of water to supply one full year of clean water for a family of four. <li>Package includes - black metal bracket, three big blue housings with caps, three filter cartridges, and a 4.5 inch housing wrench.
    $469.99
    iSpring 2-Stage Whole House Water Filter, 4.5"X10" Big Blue, 1" Ports (WGB21B)

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • At iSpring, we look beyond technology to make high quality drinking water accessible for all households. We provide our customers with professional water solutions to any water concerns they may have.


    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB22B or WGB21B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB22BM or WGB22B-PB earns its keep.
    If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB22BM or WGB22B-PB over the WGB22B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB22B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features


      • 50,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides over half year of clean water for your entire family.


      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)


    • The WGB21B whole house filtration system is the ideal 'point of entry' filtration system for cleaning up water supplies to a home or business on contaminated municipal (city) water or chlorine-treated well water. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)


    Product Features

    iSpring 2-stage Whole House Water Filter System generates clean water for the whole house. The unit removes sediment and rust, chlorine taste and odor, scale, and many other water impurities. After filtering, water could be used for drinking directly, if the city water supply is already in high quality, it will bring the water quality even higher.

    Product Highlights

    • 1" in & out and 4.5"X10" blue housings -- lose less water pressure
    • Two Stages of filtration - removes up to 95% of VOCs, TOCs, sediment, chlorine, and other contaminants that cause foul tastes and odors.
    • 50,000 gallon capacity - replaceable carbon filter provides a full year of clean water for a family of four.
    • Easy installation. Opening wrench (for 20" filter housings) included.
    • Pressure release valve (allows for release of built-up pressure when changing filters)
    • Comes assembled with wall mounting bracket
    • Standard replacement cartridges 4.5" x 10"

    What's included

    1st Stage

    5 micron 10" high-capacity polypropylene sediment filter -- removes dust, particles, and rust. Tested by independent third-party to meet NSF/ANSI Standard. ( order info .)

    2nd Stage

    Carbon Block 5 micron 10" -- gets rid of unpleasant chlorine, tastes and odors, cloudiness and colors. Tested by independent third-party to meet NSF/ANSI Standard. ( order info .)

    Installation Hardware

    Filter housing wrench and user manual.


    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supplies
    • System Capacity: 300 gallons per day @ 50/60 psi & 77 deg F
    • Feed Water pH: 3.0 - 11.0
    • Feed Water Pressure: 40 - 95 psi
    • Feed Water Temperature: 40-100 F (4 - 38 C)
    • Max Total Dissolved Solids: 2500 ppm
    • System Package Dimensions(inch): 12w x 10d x 26h
    • System Package Weight : 15 lbs

    Notes

    • For filter cartridge replacement schedule and price, see Replacement.
    <li>Features Odor & Chlorine Removal<li>Two Stages of filtration - removes up to 95% of VOCs, TOCs, sediment, chlorine, and other contaminants that cause foul tastes and odors.<li>50,000 gallon capacity - replaceable carbon filter provides a full year of clean water for a family of four.<li>Standard replacement cartridges 4.5" x 10"
    $165.99
    iSpring 3-Stage Whole House Water Filtration System w/ Lead Iron & Manganese Reducing Filter (WGB32B-PB)

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • Ultra filtration capacity for lead at 15,000ppm (the average lead level found in Flint, Michigan is 100ppb)
      Filtration Capacity: 150k gal at 100ppb for lead; 10k gal at 3.0ppm for iron


    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB32B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB32BM or WGB32B-PB earns its keep. If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB32BM or WGB32B-PB over the WGB32B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB32B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features


      • 100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.


      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)


    • The WGB32B-PB is equipped with an lead and iron filter, removing up to 99% of both contaminants. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)




    Product Features

    • Oversize filters improve flow rate and reduce maintenance frequency
    • Excellent purification - removes up to 95-percent of iron, manganese, sediment, chemicals and other contaminants that create foul tastes and odors
    • Dual gradient density replaceable sediment filter produces finer filtration and greater dirt holding capacity. Filtration down to 5 micron
    • 100,000-Gallon capacity replaceable coconut shell carbon filter provides a full year of clean water for a family of four
    • Solid filter housings with 1 inch ports for the strongest water pressure possible - up to 15-Gallon per minute
    • Low cost non-proprietary standard replacement cartridges 4.5" x 20" (one set of three is already included: 1 Sediment + 1 CTO Carbon + 1 Lead, Iron, Manganese Reduction Filter).
    • Efficiently reduces lead (500 ppb -> 15 ppb), iron (6.0 -> 0.01 ppm), manganese (3.0 -> 0.01 ppm)
    • Ultra high capacity at 15,000 ppm for lead (the average lead level of Flint water crisis is 100 ppb, the average house hold uses 400 gallons of water a day, this cartridge will last 15,000*1000/100/400 = 375 days)
    • Ultra high capacity at 30,000 ppm for iron and manganese
    • Stable and satisfactory performance at wider pH range 5.8 - 8.6 and temperature range 40 - 113F
    • Higher linear velocities than conventional media delivers high Flow Rates & very low pressure drop
    • Lasts up to 3 times longer than Greensand because the catalytic media is not consumed in the Iron Reduction Process
    • Safe for Drinking Water Applications. Tested by independent third-party to meet NSF/ANSI Standard (NSF/ANSI 61 DRINKING WATER SYSTEM COMPONENTS)
    • *Note* The lead & iron reducing filter #FCRC25B's capacity for iron is much lower than the capacity for lead. Depending on the amount in your water, the filter may lose effectiveness in removing iron before the life of the filter expires. If iron is the main concern, you may instead want to look at using a filter specifically for iron such as the #FM25B, which is also included in our whole house systems #WGB22BM and #WGB32BM.

    What's included

    1st Stage

    4.5" x 20" 5 Micron High-Capacity Polypropylene Sediment Filter (FP25B): Removes dust, particles, rust, and other sediments. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    2nd Stage

    4.5" x 20" 5 Micron CTO Carbon Block Filter (FC25B): Removes chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, volatile organic chemicals (VOCs), and various other contaminants. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    3rd Stage

    FCRC25B Iron & Lead Reducing Water Filter, High Capacity 4.5" X 20" Big Blue. Removes potassium, cesium, magnesium, calcium, strontium, barium, radium, chrome +3, manganese, iron, nickel, copper, silver, zinc, cadmium, mercury, aluminum, tin, and lead. (order info)

    Installation Hardware

    Filter housing wrench and user manual.


    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supplies
    • Inlet/Outlet: 1.0 inch Female NPT
    • System Capacity: 100,000 Gal
    • Flow Rate: 3 - 15 GPM
    • Feed Water pH: 3.0 - 11.0
    • Feed Water Pressure: 40 - 80 psi
    • Feed Water Temperature: 40 - 100 F (4 - 38 C)
    • Max Total Dissolved Solids: 2000 ppm
    • System Dimensions(inch): 27 high x 21 wide x 8 deep
    • System Package Weight : 55 lbs
    <li>Features Lead Iron & Manganese Reducing for your whole house.<li>Ultra high capacity at 15,000 ppm for lead (the average lead level of Flint water crisis is 100 ppb, the average house hold uses 400 gallons of water a day, this cartridge will last 15,000*1000/100/400 = 375 days)<li>Excellent purification - removes up to 95-percent of iron, manganese, sediment, chemicals and other contaminants that create foul tastes and odors<li>100,000-Gallon capacity replaceable coconut shell carbon filter provides a full year of clean water for a family of four<li>Oversize filters improve flow rate and reduce maintenance frequency
    $509.99
    iSpring WGB32BM 3-Stage Whole House Water Filtration System (w/Iron & Manganese Reducing Filter) w/ 3/4'' Push-Fit Braided Stainless Steel Hose Connectors and Ball Valve (WGB32BM+AHPF12MNPT16X2)

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • iSpring iron manganese filter efficiently reduces iron (3.0 -> 0.01 ppm) and manganese (1.0 -> 0.01 ppm) and lasts up to 3 times longer than greensand.
      Filtration Capacity: 50k gal at 3.0ppm for iron.

    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32BM whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB32B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB32BM or WGB32B-PB earns its keep. If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB32BM or WGB32B-PB over the WGB32B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB32B fits the bill.


    Q: How does this filter remove iron in the water? Does 6ppm to 0.01ppm apply to any water source?
    A: It depends on the quality of the source water. If the source water has a higher level of hardness, normally with TDS higher than 700, the resin in the filter could be saturated by Calcium, Lead, Magnesium and other cations, and would not be able to remove iron and manganese effectively. In this case, please install it behind a Water Softener that can either remove or neutralize these cations first in order to extend the lifespan of this FM25B iron manganese removal filter.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.


    Highlight Features

      • 100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.

      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals, heavy metals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)

    • The WGB32BM is equipped with an iron and manganese filter, removing up to 99% of both contaminants. The filter is also capable of greatly reducing arsenic, however this will vary depending on the specific isotope. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)


    <li>Equipped with gradient three stage filtration, iSpring WGB32BM whole house water system removes sediment, chlorine, Iron, Manganese, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. <li>With 1 inch NPT inlet/ outlet, it has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance. <li>Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. <li>Two 12 inch 1'' MNPT X 3/4'' push-fit hoses are included to provide a hassle-free installation to any 3/4'' pipe, including Copper, PEX, or CPVC pipes. No welding or glue needed - just push in the pipe and it is locked in place. A removal tool is also included if you need to disconnect the system from the pipes. <li>Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), thus it keeps the healthy minerals in the water. <li>The last stage FM25B iron and manganese removal filter efficiently reduces iron (3.0 -> 0.01 ppm) and manganese (1.0 -> 0.01 ppm), and lasts up to 3 times longer than greensand because the catalytic media is not being consumed in the process. <li>Package includes - black metal bracket, three big blue housings with caps, three filter cartridges, a 4.5 inch housing wrench, two 1'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.
    $564.99
    iSpring WGB22B-PB Lead Iron Chloride Reducing 2-Stage 80,000 Gal. Big Blue Whole House Water Filter w/ 3/4 inch Push-Fit Braided Stainless Steel Hose Connectors and Ball Valve (WGB22B-PB+AHPF12MNPT16X2)

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life

    • Ultra filtration capacity for lead at 15,000ppm (the average lead level found in Flint, Michigan is 100ppb).
      Filtration Capacity: 150k gal at 100ppb for lead; 10k gal at 3.0ppm for iron.

    • At iSpring, we look beyond technology to make high quality drinking water accessible for all households. We provide our customers with professional water solutions to any water concerns they may have.


    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB22B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB22BM or WGB22B-PB earns its keep.
    If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB22BM or WGB22B-PB over the WGB22B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB22B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features


      • 100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.


      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)


    • The WGB22B-PB is equipped with an iron and lead filter, removing up to 99% of both contaminants. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)



    Product Overview

      Enjoy clean, crystal clear water to every faucet and bath in your home with this superior quality ISPRING 2-stage Big Blue whole house water filter. Research shows, besides the wide spread pollution in water source, the long pipe that transmits water into your home is also prone to secondary pollution. German building code DIN 1988-4 requires that every new building must have a water filter at Point of Entry. This 2-stage filter can reduce most of the common pollutants, including Potassium, cesium, magnesium, calcium, strontium, barium, radium, chrome +3, manganese, iron, nickel, copper, silver, zinc, cadmium, mercury, aluminum, tin, lead.

    Product Features

    • 2-stage filtration with NSF certified filters - removes up to 95% of sediment, rust, chlorine, heavy metal, VOCs and other common contaminants
    • Jumbo ports, housing and cartridge - improves flow rate up to 15 GPM, reduces pressure loss down to 1 psi, reduce maintenance frequency and cost
    • 80,000 Gal. capacity - typically lasts 1 year for a family of 4 and average source water
    • Genuine filter replacement supply - factory direct sell for guaranteed performance and capacity at low cost

    What's included

    1st Stage

    4.5" x 20" 5 Micron CTO Carbon Block Filter (FC25B): Removes chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, volatile organic chemicals (VOCs), and various other contaminants. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    2nd Stage

    Lead removal cartridge (FCRC25B) reduces lead, iron and metallic tastes in drinking water. ( order info)

    Installation Hardware

    Filter housing wrench and user manual, black metal bracket, two big blue housings with caps, two filter cartridges, a 4.5 inch housing wrench, two 1'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.


    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supplies
    • System Capacity: 500 gallons per day @ 50/60 psi & 77 deg F
    • Feed Water pH: 7.0 -10.0
    • Feed Water Pressure: 20-80 psi
    • Feed Water Temperature: 40-100 F (4 - 38 C)
    • Max Total Dissolved Solids: 2000 ppm
    • System Dimensions(inch): 26Hx15.5Wx8.5D
    • System Package Weight : 40 lbs

    Notes

    • For filter cartridge replacement schedule and price, see Replacement.
    • The lead & iron reducing filter #FCRC25B's capacity for iron is much lower than the capacity for lead. Depending on the amount in your water, the filter may lose effectiveness in removing iron before the life of the filter expires. If iron is the main concern, you may instead want to look at using a filter specifically for iron such as the #FM25B, which is also included in our whole house systems #WGB22BM and #WGB32BM.
    <li>Equipped with gradient two stage filtration, iSpring WGB22B-PB whole house water system removes sediment, chlorine, lead, Iron,rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. <li>With 1 inch NPT inlet/ outlet, it has minimum impact on water flow and requires minimum maintenance. <li>Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. Two 12 inch 1'' MNPT X 3/4'' push-fit hoses are included to provide a hassle-free installation to any 3/4'' pipe, including Copper, PEX, or CPVC pipes. <li>No welding or glue needed - just push in the pipe and it is locked in place. A removal tool is also included if you need to disconnect the system from the pipes. <li>Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), thus it keeps the healthy minerals in the water. <li>The first stage CTO Carbon Block filter uses high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by independent third-party to meet NSF/ANSI Standards. Both filters have a capacity of 100,000 gallon of water to supply one full year of clean water for a family of four. <li>The second stage FCRC25B Lead & Iron removal filter features high capacity at 15,000 ppm for lead. Effectively reduces lead to below 15 ppb (EPA standard for drinking water). <li>Package includes - black metal bracket, two big blue housings with caps, two filter cartridges, a 4.5 inch housing wrench, two 1'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.
    $469.99
    iSpring 2-Stage Big Blue Whole House Water Filter, Iron, Manganese Reducing (WGB22BM)

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • iSpring iron manganese filter efficiently reduces iron (6.0 -> 0.01 ppm) and manganese (3.0 -> 0.01 ppm) and lasts up to 3 times longer than greensand.
      Filtration Capacity: 50k gal at 3.0ppm for iron

    • At iSpring, we look beyond technology to make high quality drinking water accessible for all households. We provide our customers with professional water solutions to any water concerns they may have.


    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB22B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB22BM or WGB22B-PB earns its keep.
    If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB22BM or WGB22B-PB over the WGB22B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB22B fits the bill.


    Q: How does this filter remove iron in the water? Does 6ppm to 0.01ppm apply to any water source?
    A: It depends on the quality of the source water. If the source water has a higher level of hardness, normally with TDS higher than 700, the resin in the filter could be saturated by Calcium, Lead, Magnesium and other cations, and would not be able to remove iron and manganese effectively. In this case, please install it behind a Water Softener that can either remove or neutralize these cations first in order to extend the lifespan of this FM25B iron manganese removal filter.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features


      • 100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.


      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)


      • The WGB22BM is equipped with an iron and manganese filter, removing up to 99% of both contaminants. The filter is also capable of greatly reducing arsenic, however this will vary depending on the specific isotope. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)



    Product Overview

      Enjoy clean, crystal clear water to every faucet and bath in your home with this superior quality ISPRING 2-stage Big Blue whole house water filter. Research shows, besides the wide spread pollution in water source, the long pipe that transmits water into your home is also prone to secondary pollution. German building code DIN 1988-4 requires that every new building must have a water filter at Point of Entry. This 2-stage filter can reduce up to 95% of iron, manganese, arsenic, sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants.

    Product Features

    • 2-stage filtration with NSF certified filters - removes up to 95% of sediment, rust, chlorine, heavy metal, VOCs and other common contaminants
    • Jumbo ports, housing and cartridge - improves flow rate up to 15 GPM, reduces pressure loss down to 1 psi, reduce maintenance frequency and cost
    • 80,000 Gal. capacity - typically lasts 1 year for a family of 4 and average source water
    • Genuine filter replacement supply - factory direct sell for guaranteed performance and capacity at low cost

    What's included

    1st Stage

    4.5" x 20" 5 Micron CTO Carbon Block Filter (FC25B): Removes chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, volatile organic chemicals (VOCs), and various other contaminants. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    2nd Stage

    Iron & manganese removal cartridge (FM25B) is effective on iron, manganese, and more ( Order info)

    Installation Hardware

    Filter housing wrench and user manual.


    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supplies
    • System Capacity: 500 gallons per day @ 50/60 psi & 77 deg F
    • Feed Water pH: 7.0 -10.0
    • Feed Water Pressure: 20-80 psi
    • Feed Water Temperature: 40-100 F (4 - 38 C)
    • Max Total Dissolved Solids: 2000 ppm
    • System Dimensions(inch): 26Hx15.5Wx8.5D
    • System Package Weight : 40 lbs

    Notes

    • For filter cartridge replacement schedule and price, see Replacement.
    <li>Features Iron, Manganese Reducing for your whole house<li>2-stage filtration with NSF certified filters - removes up to 95% of sediment, rust, chlorine, heavy metal, VOCs and other common contaminants<li>80,000 Gal. capacity - typically lasts 1 year for a family of 4 and average source water<li>Jumbo ports, housing and cartridge - improves flow rate up to 15 GPM, reduces pressure loss down to 1 psi, reduce maintenance frequency and cost
    $399.99
    iSpring 2-Stage Whole House Water Filter Big Blue-Odor& Chlorine Reducing (WGB22B)

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • At iSpring, we look beyond technology to make high quality drinking water accessible for all households. We provide our customers with professional water solutions to any water concerns they may have.


    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB22B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB22BM or WGB22B-PB earns its keep.
    If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB22BM or WGB22B-PB over the WGB22B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB22B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features


      • 100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.


      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)


    • The WGB22B whole house filtration system is the ideal 'point of entry' filtration system for cleaning up water supplies to a home or business on contaminated municipal (city) water. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)




    Product Features

    • Dual Stages of 20" BIG Blue high capacity cartridge, capable of supplying clean water to house of 8 people
    • Combine the power of sediment and carbon filter to removes a wide range of contaminants, certified to NSF drinking water treament standard 42/53
    • Easy installation with 1" inlet/outlet for big flow while preserving water pressure
    • Pressure release valve (allows for release of built-up pressure when changing filters)
    • Low cost non-proprietary standard replacement cartridges 4.5" x 20" (one set of three is already included: 1 Sediment + 1 CTO Carbon).
    • Housing wrench and manual included

    What's included

    1st Stage

    4.5" x 20" 5 Micron High-Capacity Polypropylene Sediment Filter (FP25B): Removes dust, particles, rust, and other sediments. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    2nd Stage

    4.5" x 20" 5 Micron CTO Carbon Block Filter (FC25B): Removes chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, volatile organic chemicals (VOCs), and various other contaminants. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    Installation Hardware

    Filter housing wrench and user manual.


    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supplies
    • System Capacity: 500 gallons per day @ 50/60 psi & 77 deg F
    • Feed Water pH: 3.0 -11.0
    • Feed Water Pressure: 40-80 psi
    • Feed Water Temperature: 40-100 F (4 - 38 C)
    • Max Total Dissolved Solids: 2500 ppm
    • System Dimensions(inch): 15.5w x 8.5d x 26h
    • System Package Weight : 40 lbs

    Notes

    • For filter cartridge replacement schedule and price, see Replacement.
    <li>Equipped with gradient two stage filtration, iSpring WGB22B whole house water system removes sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. With 1 inch NPT inlet/ outlet, it has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance. <li>Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. Big Blue 20 inches x 4.5inches filter cartridges allow for minimal pressure reduction and extended filter life. <li>Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), thus it keeps the healthy minerals in the water. <li>The first stage high capacity polypropylene sediment filter achieves filtration down to 5 microns. The second stage CTO Carbon Block filter uses high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by independent third-party to meet NSF/ANSI Standards. Both filters have a capacity of 100,000 gallon of water to supply one full year of clean water for a family of four. <li>Package includes - black metal bracket, two big blue housings with caps, two filter cartridges, and a 4.5 inch housing wrench. <li>The model # of the original filter cartridge pack in the system is F2WGB22B, which includes these genuine iSpring Big Blue Filter cartridges: FP25B and FC25B.
    $329.99
    iSpring WGB22BM Iron Manganese Chloride Reducing 2-Stage 80,000 Gal. Big Blue Whole House Water Filter w/ 3/4 inch Push-Fit Braided Stainless Steel Hose Connectors and Ball Valve … (WGB22BM+AHPF12MNPT16X2)

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • iSpring iron manganese filter efficiently reduces iron (6.0 -> 0.01 ppm) and manganese (3.0 -> 0.01 ppm) and lasts up to 3 times longer than greensand.
      Filtration Capacity: 50k gal at 3.0ppm for iron

    • At iSpring, we look beyond technology to make high quality drinking water accessible for all households. We provide our customers with professional water solutions to any water concerns they may have.


    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB22B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB22BM or WGB22B-PB earns its keep.
    If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB22BM or WGB22B-PB over the WGB22B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB22B fits the bill.


    Q: How does this filter remove iron in the water? Does 6ppm to 0.01ppm apply to any water source?
    A: It depends on the quality of the source water. If the source water has a higher level of hardness, normally with TDS higher than 700, the resin in the filter could be saturated by Calcium, Lead, Magnesium and other cations, and would not be able to remove iron and manganese effectively. In this case, please install it behind a Water Softener that can either remove or neutralize these cations first in order to extend the lifespan of this FM25B iron manganese removal filter.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features


      • 100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.


      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)


      • The WGB22BM is equipped with an iron and manganese filter, removing up to 99% of both contaminants. The filter is also capable of greatly reducing arsenic, however this will vary depending on the specific isotope. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)



    Product Overview

      Enjoy clean, crystal clear water to every faucet and bath in your home with this superior quality ISPRING 2-stage Big Blue whole house water filter. Research shows, besides the wide spread pollution in water source, the long pipe that transmits water into your home is also prone to secondary pollution. German building code DIN 1988-4 requires that every new building must have a water filter at Point of Entry. This 2-stage filter can reduce up to 95% of iron, manganese, arsenic, sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants.

    Product Features

    • 2-stage filtration with NSF certified filters - removes up to 95% of sediment, rust, chlorine, heavy metal, VOCs and other common contaminants
    • Jumbo ports, housing and cartridge - improves flow rate up to 15 GPM, reduces pressure loss down to 1 psi, reduce maintenance frequency and cost
    • 80,000 Gal. capacity - typically lasts 1 year for a family of 4 and average source water
    • Genuine filter replacement supply - factory direct sell for guaranteed performance and capacity at low cost

    What's included

    1st Stage

    4.5" x 20" 5 Micron CTO Carbon Block Filter (FC25B): Removes chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, volatile organic chemicals (VOCs), and various other contaminants. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    2nd Stage

    Iron & manganese removal cartridge (FM25B) is effective on iron, manganese, and more ( Order info)

    Installation Hardware

    Filter housing wrench and user manual, black metal bracket, two big blue housings with caps, two filter cartridges, a 4.5 inch housing wrench, two 1'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.


    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supplies
    • System Capacity: 500 gallons per day @ 50/60 psi & 77 deg F
    • Feed Water pH: 7.0 -10.0
    • Feed Water Pressure: 20-80 psi
    • Feed Water Temperature: 40-100 F (4 - 38 C)
    • Max Total Dissolved Solids: 2000 ppm
    • System Dimensions(inch): 26Hx15.5Wx8.5D
    • System Package Weight : 40 lbs

    Notes

    • For filter cartridge replacement schedule and price, see Replacement.
    <li>Equipped with gradient two stage filtration, iSpring WGB22BM whole house water system removes sediment, chlorine, Iron, Manganese, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. <li>With 1 inch NPT inlet/ outlet, it has minimum impact on water flow and requires minimum maintenance. <li>Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. <li>Two 12 inch 1'' MNPT X 3/4'' push-fit hoses are included to provide a hassle-free installation to any 3/4'' pipe, including Copper, PEX, or CPVC pipes. <li>No welding or glue needed - just push in the pipe and it is locked in place. A removal tool is also included if you need to disconnect the system from the pipes. <li>Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), thus it keeps the healthy minerals in the water. <li>The first stage CTO Carbon Block filter uses high quality coconut shell carbon for maximum filtration efficiency and filter life. It is tested by independent third-party to meet NSF/ANSI Standards and has a capacity of 100,000 gallon of water to supply one full year of clean water for a family of four. <li>The Second stage FM25B iron and manganese removal filter efficiently reduces iron (3.0 -> 0.01 ppm) and manganese (1.0 -> 0.01 ppm), and lasts up to 3 times longer than greensand because the catalytic media is not being consumed in the process. <li>Package includes - black metal bracket, two big blue housings with caps, two filter cartridges, a 4.5 inch housing wrench, two 1'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.
    $452.99
    iSpring WGB22B 2-Stage 20-Inch Big Blue Whole House Water Filter 1-Inch NPT Carbon w/ 3/4 inch Push-Fit Braided Stainless Steel Hose Connectors and Ball Valve (WGB22B+AHPF12MNPT16X2)

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • At iSpring, we look beyond technology to make high quality drinking water accessible for all households. We provide our customers with professional water solutions to any water concerns they may have.


    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB22B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB22BM or WGB22B-PB earns its keep.
    If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB22BM or WGB22B-PB over the WGB22B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB22B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features


      • 100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.


      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)


    • The WGB22B whole house filtration system is the ideal 'point of entry' filtration system for cleaning up water supplies to a home or business on contaminated municipal (city) water. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)




    Product Features

    • Dual Stages of 20" BIG Blue high capacity cartridge, capable of supplying clean water to house of 8 people
    • Combine the power of sediment and carbon filter to removes a wide range of contaminants, certified to NSF drinking water treament standard 42/53
    • Easy installation with 1" inlet/outlet for big flow while preserving water pressure
    • Pressure release valve (allows for release of built-up pressure when changing filters)
    • Low cost non-proprietary standard replacement cartridges 4.5" x 20" (one set of three is already included: 1 Sediment + 1 CTO Carbon).
    • Housing wrench and manual included

    What's included

    1st Stage

    4.5" x 20" 5 Micron High-Capacity Polypropylene Sediment Filter (FP25B): Removes dust, particles, rust, and other sediments. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    2nd Stage

    4.5" x 20" 5 Micron CTO Carbon Block Filter (FC25B): Removes chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, volatile organic chemicals (VOCs), and various other contaminants. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    Installation Hardware

    Filter housing wrench and user manual, black metal bracket, two big blue housings with caps, two filter cartridges, a 4.5 inch housing wrench, two 1'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.


    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supplies
    • System Capacity: 500 gallons per day @ 50/60 psi & 77 deg F
    • Feed Water pH: 3.0 -11.0
    • Feed Water Pressure: 40-80 psi
    • Feed Water Temperature: 40-100 F (4 - 38 C)
    • Max Total Dissolved Solids: 2500 ppm
    • System Dimensions(inch): 15.5w x 8.5d x 26h
    • System Package Weight : 40 lbs

    Notes

    • For filter cartridge replacement schedule and price, see Replacement.
    <li>Equipped with gradient two stage filtration, iSpring WGB22B whole house water system removes sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. <li>With 1 inch NPT inlet/ outlet, it has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance. <li>Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. <li>Two 12 inch 1'' MNPT X 3/4'' push-fit hoses are included to provide a hassle-free installation to any 3/4'' pipe, including Copper, PEX, or CPVC pipes. <li>No welding or glue needed - just push in the pipe and it is locked in place. A removal tool is also included if you need to disconnect the system from the pipes. <li>Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), thus it keeps the healthy minerals in the water. <li>The first stage high capacity polypropylene sediment filter achieves filtration down to 5 microns. <li>The second stage CTO Carbon Block filter uses high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by independent third-party to meet NSF/ANSI Standards. Both filters have a capacity of 100,000 gallon of water to supply one full year of clean water for a family of four. <li>Package includes - black metal bracket, two big blue housings with caps, two filter cartridges, a 4.5 inch housing wrench, two 1'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.
    $384.99
    iSpring 2-Stage Whole House Water Filter Big Blue-Lead Iron Manganese Reducing (WGB22B-PB)

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life

    • Ultra filtration capacity for lead at 15,000ppm (the average lead level found in Flint, Michigan is 100ppb).
      Filtration Capacity: 150k gal at 100ppb for lead; 10k gal at 3.0ppm for iron.

    • At iSpring, we look beyond technology to make high quality drinking water accessible for all households. We provide our customers with professional water solutions to any water concerns they may have.


    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB22B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB22BM or WGB22B-PB earns its keep.
    If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB22BM or WGB22B-PB over the WGB22B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB22B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features


      • 100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.


      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)


    • The WGB22B-PB is equipped with an iron and lead filter, removing up to 99% of both contaminants. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)



    Product Overview

      Enjoy clean, crystal clear water to every faucet and bath in your home with this superior quality ISPRING 2-stage Big Blue whole house water filter. Research shows, besides the wide spread pollution in water source, the long pipe that transmits water into your home is also prone to secondary pollution. German building code DIN 1988-4 requires that every new building must have a water filter at Point of Entry. This 2-stage filter can reduce most of the common pollutants, including Potassium, cesium, magnesium, calcium, strontium, barium, radium, chrome +3, manganese, iron, nickel, copper, silver, zinc, cadmium, mercury, aluminum, tin, lead.

    Product Features

    • 2-stage filtration with NSF certified filters - removes up to 95% of sediment, rust, chlorine, heavy metal, VOCs and other common contaminants
    • Jumbo ports, housing and cartridge - improves flow rate up to 15 GPM, reduces pressure loss down to 1 psi, reduce maintenance frequency and cost
    • 80,000 Gal. capacity - typically lasts 1 year for a family of 4 and average source water
    • Genuine filter replacement supply - factory direct sell for guaranteed performance and capacity at low cost

    What's included

    1st Stage

    4.5" x 20" 5 Micron CTO Carbon Block Filter (FC25B): Removes chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, volatile organic chemicals (VOCs), and various other contaminants. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    2nd Stage

    Lead removal cartridge (FCRC25B) reduces lead, iron and metallic tastes in drinking water. ( order info)

    Installation Hardware

    Filter housing wrench and user manual.


    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supplies
    • System Capacity: 500 gallons per day @ 50/60 psi & 77 deg F
    • Feed Water pH: 7.0 -10.0
    • Feed Water Pressure: 20-80 psi
    • Feed Water Temperature: 40-100 F (4 - 38 C)
    • Max Total Dissolved Solids: 2000 ppm
    • System Dimensions(inch): 26Hx15.5Wx8.5D
    • System Package Weight : 40 lbs

    Notes

    • For filter cartridge replacement schedule and price, see Replacement.
    • The lead & iron reducing filter #FCRC25B's capacity for iron is much lower than the capacity for lead. Depending on the amount in your water, the filter may lose effectiveness in removing iron before the life of the filter expires. If iron is the main concern, you may instead want to look at using a filter specifically for iron such as the #FM25B, which is also included in our whole house systems #WGB22BM and #WGB32BM.
    <li>Features Lead Iron Manganese Reducing for your whole house<li>2-stage filtration with NSF certified filters - removes up to 95% of sediment, rust, chlorine, heavy metal, VOCs and other common contaminants<li>80,000 Gal. capacity - typically lasts 1 year for a family of 4 and average source water<li>Jumbo ports, housing and cartridge - improves flow rate up to 15 GPM, reduces pressure loss down to 1 psi, reduce maintenance frequency and cost.
    $399.99
    iSpring WGB32B-PB 3-Stage Whole House Water Filtration System (w/ 20-Inch Big Blue Carbon Block, and Iron & Lead Reducing Filter) w/ 3/4'' Push-Fit Stainless Steel Hose Connectors and Ball Valve (WGB32B-PB+AHPF12MNPT16X2)

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • Ultra filtration capacity for lead at 15,000ppm (the average lead level found in Flint, Michigan is 100ppb)
      Filtration Capacity: 150k gal at 100ppb for lead; 10k gal at 3.0ppm for iron


    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB32B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB32BM or WGB32B-PB earns its keep. If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB32BM or WGB32B-PB over the WGB32B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB32B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features


      • 100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.


      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)


    • The WGB32B-PB is equipped with an lead and iron filter, removing up to 99% of both contaminants. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)




    Product Features

    • Oversize filters improve flow rate and reduce maintenance frequency
    • Excellent purification - removes up to 95-percent of iron, manganese, sediment, chemicals and other contaminants that create foul tastes and odors
    • Dual gradient density replaceable sediment filter produces finer filtration and greater dirt holding capacity. Filtration down to 5 micron
    • 100,000-Gallon capacity replaceable coconut shell carbon filter provides a full year of clean water for a family of four
    • Solid filter housings with 1 inch ports for the strongest water pressure possible - up to 15-Gallon per minute
    • Low cost non-proprietary standard replacement cartridges 4.5" x 20" (one set of three is already included: 1 Sediment + 1 CTO Carbon + 1 Lead, Iron, Manganese Reduction Filter).
    • Efficiently reduces lead (500 ppb -> 15 ppb), iron (6.0 -> 0.01 ppm), manganese (3.0 -> 0.01 ppm)
    • Ultra high capacity at 15,000 ppm for lead (the average lead level of Flint water crisis is 100 ppb, the average house hold uses 400 gallons of water a day, this cartridge will last 15,000*1000/100/400 = 375 days)
    • Ultra high capacity at 30,000 ppm for iron and manganese
    • Stable and satisfactory performance at wider pH range 5.8 - 8.6 and temperature range 40 - 113F
    • Higher linear velocities than conventional media delivers high Flow Rates & very low pressure drop
    • Lasts up to 3 times longer than Greensand because the catalytic media is not consumed in the Iron Reduction Process
    • Safe for Drinking Water Applications. Tested by independent third-party to meet NSF/ANSI Standard (NSF/ANSI 61 DRINKING WATER SYSTEM COMPONENTS)
    • *Note* The lead & iron reducing filter #FCRC25B's capacity for iron is much lower than the capacity for lead. Depending on the amount in your water, the filter may lose effectiveness in removing iron before the life of the filter expires. If iron is the main concern, you may instead want to look at using a filter specifically for iron such as the #FM25B, which is also included in our whole house systems #WGB22BM and #WGB32BM.

    What's included

    1st Stage

    4.5" x 20" 5 Micron High-Capacity Polypropylene Sediment Filter (FP25B): Removes dust, particles, rust, and other sediments. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    2nd Stage

    4.5" x 20" 5 Micron CTO Carbon Block Filter (FC25B): Removes chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, volatile organic chemicals (VOCs), and various other contaminants. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    3rd Stage

    FCRC25B Iron & Lead Reducing Water Filter, High Capacity 4.5" X 20" Big Blue. Removes potassium, cesium, magnesium, calcium, strontium, barium, radium, chrome +3, manganese, iron, nickel, copper, silver, zinc, cadmium, mercury, aluminum, tin, and lead. (order info)

    Installation Hardware

    Filter housing wrench and user manual, black metal bracket, three big blue housings with caps, three filter cartridges, a 4.5 inch housing wrench, two 1'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.


    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supplies
    • Inlet/Outlet: 1.0 inch Female NPT
    • System Capacity: 100,000 Gal
    • Flow Rate: 3 - 15 GPM
    • Feed Water pH: 3.0 - 11.0
    • Feed Water Pressure: 40 - 80 psi
    • Feed Water Temperature: 40 - 100 F (4 - 38 C)
    • Max Total Dissolved Solids: 2000 ppm
    • System Dimensions(inch): 27 high x 21 wide x 8 deep
    • System Package Weight : 55 lbs
    <li>Equipped with gradient three stage filtration, iSpring WGB32B-PB whole house water system removes sediment, chlorine, lead, Iron, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. With 1 inch NPT inlet/ outlet, it has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance. <li>Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. <li>Two 12 inch 1'' MNPT X 3/4'' push-fit hoses are included to provide a hassle-free installation to any 3/4'' pipe, including Copper, PEX, or CPVC pipes. <li>No welding or glue needed - just push in the pipe and it is locked in place. A removal tool is also included if you need to disconnect the system from the pipes. <li>Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), thus it keeps the healthy minerals in the water. <li>The last stage FCRC25B Lead & Iron removal filter features high capacity at 15,000 ppm for lead. Effectively reduces lead to below 15 ppb (EPA standard for drinking water) <li>Package includes - black metal bracket, three big blue housings with caps, three filter cartridges, a 4.5 inch housing wrench, two 1'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.
    $564.99
    iSpring WGB32B 3-Stage Whole House Water Filtration System w/ 20-Inch Big Blue Sediment and Carbon Block Filters w/ 3/4'' Push-Fit Stainless Steel Hose Connectors and Ball Valve (WGB32B+AHPF12MNPT16X2)

    • iSpring Multi-layer filtration allows for less clogs and minimal pressure loss.

    • iSpring carbon block filter uses high quality coconut shell carbon and highly compact fabrication tech for maximum filtration efficiency and filter life.

    • Knocks out residual bad tastes and odors. Two CTOs combine to remove over 99% of chlorine, and are highly effective on organic chemicals like pesticides, herbicides and industrial chemicals.

    Frequently Asked Questions

    Q: With this whole house system, do I still need to install a water softener if my water is very hard?
    A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
    This whole house water filter can remove 95% of sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB32B whole house system after your water softener to achieve optimal performance if you have hard water.
    To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
    NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.


    Q: What type of Whole House Water Filter do I need?
    A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese and lead, the WGB32B is the system to go with. Naturally occurring metals are a commonplace in most well water sources however, and that is where the WGB32BM or WGB32B-PB earns its keep. If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB32BM or WGB32B-PB over the WGB32B. For removing the common contaminants found in the majority of municipal water supplies however, the WGB32B fits the bill.


    Q: What flow rate should I look for?
    A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.



    Highlight Features

      • 100,000-gallon capacity replaceable highly compact coconut shell activated carbon filter provides a full year of clean water for your entire family.

      • This whole house system removes up to 98 percent of sediment, chlorine, chloramines, chemicals and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)

      • The WGB32B is equipped with back-to-back coconut shell carbon block filters. The densely packed carbon block filtration media provides more effective contaminant removal and longer filter life. (Tested by independent third-party to meet NSF/ANSI Standards: 42, 53 for drinking water treatment units, 2018)


        • Accepts 20” x 4.5” water filter cartridges 1” NPT inlet/outlet
          Purifies up to 100K gallons of water before filter replacement (1 year)
          Feed Water Pressure: 40-100 psi
          Feed Water Temperature: 40-100°F



    Product Summary

      The iSpring 3-stage WGB32B whole house filtration system combines sediment and dual CTO carbon block filters to deliver clean, clear water to every faucet and bath in your home.

    Product Features

    • Oversized filters improve flow rate and reduce maintenance frequency.
    • Excellent purification - removes up to 95% of sediment, chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, and many other contaminants that create foul tastes, stains, and odors.
    • Dual gradient density sediment filter provides sediment filtration down to 5 microns.
    • Two 5 micron coconut shell CTO carbon block filters.
    • Solid filter housings with 1 inch NPT female ports allow for the strongest water pressure possible - up to 15 gallons per minute.
    • Low cost, 4.5" x 20" non-proprietary standard replacement cartridges (one set of three is already included: 1 Sediment + 2 CTO Carbon Blocks).
    • Lifetime technical support from iSpring at 678-261-7611 or sales@ispringfilter.com.
    • Note: System variants for removing contaminants such as iron, lead, manganese, and other heavy metals are also available: WGB32B variants

    What's Included:

    1st Stage

    4.5" x 20" 5 Micron High-Capacity Polypropylene Sediment Filter (FP25B): Removes dust, particles, rust, and other sediments. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    2nd Stage

    4.5" x 20" 5 Micron CTO Carbon Block Filter (FC25B): Removes chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, volatile organic chemicals (VOCs), and various other contaminants. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    3rd Stage

    4.5" x 20" 5 Micron CTO Carbon Block Filter (FC25B): Further removes chlorine, chloramines, pesticides, herbicides, pharmaceuticals, industrial solvents, volatile organic chemicals (VOCs), and various other contaminants. Tested by independent third-party to meet NSF/ANSI Standard. (order info)

    Installation Hardware

    Filter housing wrench and user manual, black metal bracket, three big blue housings with caps, three filter cartridges, a 4.5 inch housing wrench, two 1'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool..


    Specifications & Dimensions

    • Water Source: Chlorinated or non-chlorinated water supply
    • Inlet/Outlet: 1.0 inch female NPT
    • System Capacity: 100,000 Gal
    • Flow Rate: 3 - 15 GPM
    • Feed Water pH: 3.0 - 11.0
    • Feed Water Pressure: 40 - 80 psi
    • Approximate PSI drop from input to output: 5 PSI
    • Feed Water Temperature: 40 - 100 F (4 - 38 C)
    • Max Total Dissolved Solids (TDS): 2000 ppm
    • System Dimensions: 27" H x 21" W x 8" D
    • System Package Weight : 40 lbs

    Note


    • Check to see whether your electrical panel has its ground wire attached to the pipe or to a rod driven into the ground. If the ground wire is attached to the pipe, you will need to add a jumper cable to restore an important safety feature that prevents the filter from interrupting the ground path.
    • Install grounding clamps on either side of the filter and run a thick wire from clamp to clamp and secure tightly.
    <li>Equipped with gradient three stage filtration, iSpring WGB32B whole house water system removes sediment, chlorine, rust, pesticides, herbicides, industrial solvents, VOCs, and various other contaminants. <li>With 1 inch NPT inlet/ outlet, it has minimum impact on water flow (up to 15 GPM) and requires minimum maintenance. Installed at the main water supply to treat all the water you use in your entire home. Enjoy better water from every tap and every appliance in the whole house. <li>Two 12 inch 1'' MNPT X 3/4'' push-fit hoses are included to provide a hassle-free installation to any 3/4'' pipe, including Copper, PEX, or CPVC pipes. <li>No welding or glue needed - just push in the pipe and it is locked in place. A removal tool is also included if you need to disconnect the system from the pipes. <li>Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS), thus it keeps the healthy minerals in the water. <li>The first stage high capacity polypropylene sediment filter achieves filtration down to 5 microns. The second and third stage CTO Carbon Block filter uses high quality coconut shell carbon for maximum filtration efficiency and filter life. Both are tested by independent third-party to meet NSF/ANSI Standards. Both filters have a capacity of 100,000 gallon of water to supply one full year of clean water for a family of four. <li>Package includes - black metal bracket, three big blue housings with caps, three filter cartridges, a 4.5 inch housing wrench, two 1'' MNPT X 3/4'' push-fit hoses, plumber's tape and a removal tool.
    $519.99
    Per Page      1 - 17 of 17
    • 1