iSpring FP25B High Capacity 20” x 4.5” Water Filter Replacement Cartridge - Fine Sediment Filter - 5 Micron - Fits Standard 20” x 4.5” Whole House Water Filtration Systems - Pack of 1

  • Protect Your Family and Household Appliance from Sediments: The FP25B sediment filters are specially designed to remove sediments, dust, sand, large particles, silt, dirt, and rust from water. They are usually used as the first stage of a water filtration system to prevent the filters that follow from getting clogged too soon.
  • Standard Size: Our filter fits standard 20” x 4.5” housings, including brand name models.
  • Top-Notch Quality: The FP25B high capacity polypropylene sediment filter is able to achieve filtration down to 5 microns. The filters are tested by an independent third-party to meet NSF/ANSI standards. They have a capacity of 100,000 gallons of water, enough to supply a family of four with clean water for a full year (depending on your water quality). The 20” x 4.5” filter cartridges have a minimum impact on water flow (up to 15 GPM) and require minimum maintenance.
  • Peace of Mind Customer Service: Register online to activate your manufacturer warranty and life-time free tech support from U.S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
  • Please Note: The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use. Unlike an RO membrane, the filters don’t reduce Total Dissolved Solids (TDS), and instead keeps healthy minerals in your water. If you are interested in a filter that removes TDS, consider our iSpring Reverse Osmosis (RO) systems.
  • $29.09
    • 4.9 out of 5 stars
    Qty:
        Eligible for FREE Shipping Orders Over $35 within US 48 cont. states Details    Print

    • iSpring Universal PP Sediment Filters

      Different water filters have different purposes. Some are designed to remove chemicals from water. Others remove metallic contaminants, dissolved solids, or charged particles. Polypropylene sediment filters are usually placed as the first stage of the water filtration system to remove suspended solids, variously referred to as turbidity, sediment, or particulate.

      PP sediment filters are widely used as beds of natural media like garnet, sand, and anthracite to filter out unwanted particles like dirt and iron rust.

      In general, flow rates for sediment filters are higher than equally sized carbon or media filters. The tighter the filter is, the slower the flow will be. iSpring provides a wide variety of micron sizes to suit your specific need.


    • iSpring sediment filters are compatible with most water filtration systems' housing on the market.

      • FP11: 10", 1 micron
      • FP15: 10", 5 micron
      • FP110: 10", 10 micron
      • FP120: 10", 20 micron
      • FP25: 20", 5 micron
      • FP15B: 10" Big Blue, 5 micron
      • FP25B: 20" Big Blue, 5 micron
      • FP220B: 20" Big Blue, 20 micron


    • Inner Spiral Pattern

      Evenly separated spiral pattern increases pressure resistant, filtration area, and water flow.


    • Multilayered Structure

      Sparse Layer: Large particles are filtered to extend the filter life.

      Compaction Layer: Made with fine fiber and filters smaller particles that passed through the sparse layer.

      Precision Layer: Small dust is filtered to assure efficiency of water filtration process in the following stages.


    • High Quality Material

      iSpring sediment filters are manufactured to comply strictly with FDA standard (CFR - Part 177) and tested by independent third party against NSF/ANSI standard for material safety and water quality. (NSF/ANSI 42, by NSF International, 10/2018)


    Product Description

    Size:20 x 4.5 Inch - 5 Micron / 1 Pack
    5 micron 20" x 4.5" Polypropylene Sediment Melt Blown Filters SKU: FP25B

    Product Highlights
    • Individually wrapped
    • Dimensions: Length = 20", O.D. = 4.5", I.D. = 1 1/8"
    • Flow rate: 5 GPM - Filter life: 10,000 gallons
    • Operating Temperature: 39°F~125°F (4°C~52°C)
    • Max. Operating Pressure: 60 psi
    • Removes dust, particles, and rust - Good for water filters and aquariums. Applications
    • Food and beverages
    • Reverse Osmosis Pre filtration - Oil and gas - Fine chemicals - Electronics - Metal finishing - Pulp and paper

    Why Purchase From us
    • Free tech support before and after sale
    • Ship from Atlanta warehouse daily. Only 2-day transit time for most states in Eastern Time zone and part of Central time zone (including Texas)

    • Availability: In Stock
    • Model: FP25B
    • Manufacturer: iSpring

    Write Review

    Note: Do not use HTML in the text.