Ready to start your business? BECOME A DEALER

EARN UP TO 5% COMMISSION FOR EVERY SUCCESSFUL REFERRAL

iSpring WGB22B+AHPF12MNPT16X2 2-Stage Whole House Water Filtration System w/ 20” x 4.5” Fine Sediment and Carbon Block Filters, and 3/4 inch Push-Fit Hose Connectors

Reviews (3)

$423.99

About this item

[Protect Your Family and Household Appliance from Sediment, Chlorine, and More] Say goodbye to smelly, bad tasting water! Our system removes up to 99% of chlorine from water as well as sediment, rust, industrial solvents, and various other contaminants. This system is installed at the main water supply line in order to treat all the water in your home.
[DIY Installation and Maintenance] Refer to our manual and our helpful YouTube videos for DIY installation. 1” NPT inlet / outlet, 20” x 4.5” filter cartridges, water flow: up to 15 GPM. Two 12” push-fit hoses are included for hassle-free installation to any 3/4" pipes like Copper, PEX, or CPVC pipes with no welding or glue needed. A removal tool is also included if you need to disconnect the system from the pipes.
The first stage high capacity polypropylene sediment filter is able to achieve filtration down to 5 microns. The second stage CTO Carbon Block filter is made of coconut shell carbon to increase filtration efficiency and filter life. Both are tested by an independent third-party to meet NSF/ANSI standards. Both filters have a capacity of 100,000 gallons of water, enough to supply a family of four with clean water for a full year. The cartridges are individually wrapped to ensure freshness. Please unwrap the cartridges before use.
[Peace of Mind Customer Service] Register online to activate your 1-year manufacturer warranty and life-time free tech support from U.S. local support team. We stand behind our products and if you encounter any problems with any of our products please reach out to us immediately. We are happy to help!
[Please Note] Unlike an RO system, this system will NOT reduce Total Dissolved Solids (TDS). If you are interested in a filter that removes TDS consider our iSpring Reverse Osmosis (RO) systems.

Frequently Bought Together

Total Price: $635.51

Add all three to Cart

Choose items to buy together.

Please choose options for all selected products

This Item: WGB22B+AHPF12MNPT16X2 2-Stage Whole House Water Filtration System w/ 20” x 4.5” Fine Sediment and Carbon Block Filters, and 3/4 inch Push-Fit Hose Connectors $423.99

F4WGB22B 4.5” x 20” Whole House Water Filter Replacement Set - Two Sediment Cartridges and Two Carbon Block Cartridges - Fits WGB22B $165.99

WSP Reusable Spin Down Sediment Water Filter Whole House Water Filtration System -1" MNPT + 3/4" FNPT, Brass $65.99 $45.53

Choose Options

iSpring WGB22B+AHPF12MNPT16X2 2-Stage Whole House Water Filtration System w/ 20” x 4.5” Fine Sediment and Carbon Block Filters, and 3/4 inch Push-Fit Hose Connectors

$423.99

iSpring Multi-layer filtration reduces clogs and pressure loss.
iSpring carbon block filter uses coconut shell carbon and compact fabrication tech to increase filtration efficiency and extend filter life.

At iSpring, we look beyond technology to make high quality drinking water accessible to all households. We provide our customers with professional water solutions to any water concerns they may have.

Frequently Asked Questions

Q: With this whole house system, do I still need to install a water softener if my water is very hard?
A: Yes, a water softener is needed if your source water has a high level of hardness, usually with TDS higher than 700 PPM. Hard water can reduce the lifespan of whole house water filter cartridges. The harder the water, the greater amount of scale buildup occurs, and the sooner the filters get clogged.
This whole house water filter can remove up to 95% of sediment, chlorine, rust, industrial solvents, and various other contaminants that a regular water softener can't, although it does not soften your water. It is recommended that you install this WGB22B whole house system after your water softener to achieve optimal performance if you have hard water.
To determine which product best suits your need, it is recommended that you get a professional water test done prior to purchase to identify the main issue of your source water.
NOTE: Water Softeners and whole house systems usually do not lower the TDS level of the water. An additional Reverse Osmosis system may be necessary for your drinking water. Please consult iSpring professionals prior to purchase if you are unsure of which product will meet your needs.

Q: What type of Whole House Water Filter do I need?
A: If you are on municipal water that isn't contaminated with heavy metals like iron, manganese, and lead, the WGB22B is the system to go with. Naturally occurring metals are commonplace in most well water sources, however, and that is where the WGB22BM or WGB22B-PB earns its keep.
If you are on well water or have heavy metals in your municipal water supply, you may want to consider the WGB22BM or WGB22B-PB over the WGB22B. For removing the common contaminants found in the majority of municipal water supplies, however, the WGB22B fits the bill.

Q: What flow rate should I look for?
A: Measured in gallons per minute (GPM), flow rate determines the amount of water available to run your shower, toilet, hot water heater, dishwasher, etc. When calculating your requirements look at the demand ratings printed on your appliances and toilet. Depending on the size of your house and family your water flow rate requirements may range from 5 to 40 GPM.

Highlight Features

100,000-gallon capacity replaceable compact coconut shell activated carbon filter provides a full year of clean water for your entire family.
This whole house system removes up to 95 percent of sediment, chlorine, chloramines, chemicals, and other contaminants that create color, foul tastes and odors. (Tested by SGS, 2018)
Equipped with two of 12'' braided stainless steel hoses with brass valves, this iSpring Whole House system can easily be connected to copper, PEX, and CPVC pipes in any combination.
Simply apply some plumber's tape on the male threads to connect to an iSpring Whole House Water Filtration System and push in the Copper, PEX, or CPVC pipe on the other end.
The integrated ball valve provides quarter-turn, single handle shut-off to the water supply.

Product Features

Style:Fine Sediment and Carbon w/ hose connectors

The WGB22B whole house filtration system is a "point of entry" filtration system for cleaning up water supplies to a home or business on municipal (city) water. Unlike "point of use" systems (like reverse osmosis systems) that are installed to supply water to a specific faucet, the WGB22B filters your water from the source. This means water from every output in your home or business will have passed through the two filtration stages of the WGB22B.

So what exactly do these two stages of filtration offer? Used as the first stage of defense on the system, stage 1 housing holds a 5-micron polypropylene sediment filter. This filter removes dirt and other various larger-sized particles from the water that can clog the following filters. The second stage of the WGB22B houses a 5-micron CTO coconut shell carbon block filter. Block carbon is finely ground up carbon packed into a solidified block. It knocks out bad tastes and odors, removes up to 99% of chlorine from the water, and is effective on industrial chemicals. The WGB22B is intended for lightly contaminated municipal water.

If your water is highly chlorinated (to the point where you can smell, taste, and/or feel it), the WGB32B will be your best option as it has dual CTO carbon block filters to provide additional filtration measures. Alternatively, if you are on a well water source, you will want to take a look at the WGB32BM, which has an iron and manganese reducing filter - great for the plethora of heavy metals found in most well water sources. For standard municipal water that hasn't been heavily chlorinated, however, the WGB22B is a great choice.

Availability: In Stock
Model: WGB22B+AHPF12MNPT16X2
Manufacturer: iSpring

Braden Galloway |