iSpring FP15 5 Micron 10"x2.5" Standard Sediment Water Filter Filter Cartridges

  • Multi-layer gradient design
  • 2. 5 inch (O. D) x 10 inch (length) x 1 1/8 inch (I. D), fits industry standard 10 inch filter housings
  • Good for ro, counter-top, whole-house water filters and ice machine, film, beverage processing
  • Genuine filter cartridge Supply
  • $11.09
    Qty:
        Eligible for FREE Shipping Orders Over $35 within US 48 cont. states Details    Print
    • iSpring Standard PP Sediment Filters

      Different water filters have different purposes. Some are designed to remove chemicals from water. Others remove metallic contaminants, dissolved solids, or charged particles. Polypropylene sediment filters are usually placed as the first stage of the water filtration system to remove suspended solids, variously referred to as turbidity, sediment, or particulate.

      PP sediment filters are widely used as beds of natural media like garnet, sand, and anthracite to filter out unwanted particles like dirt and iron rust.

      In general, flow rates for sediment filters are higher than equally sized carbon or media filters. The tighter the filter is, the slower the flow will be. iSpring provides a wide variety of micron sizes to suit your specific need.

    • iSpring sediment filters are compatible with most water filtration systems' housing on the market.

      • FP11: 10", 1 micron
      • FP15: 10", 5 micron
      • FP110: 10", 10 micron
      • FP120: 10", 20 micron
      • FP25: 20", 5 micron
      • FP15B: 10" Big Blue, 5 micron
      • FP25B: 20" Big Blue, 5 micron
      • FP220B: 20" Big Blue, 20 micron

    • Inner Spiral Pattern

      Evenly separated spiral pattern increases pressure resistant, filtration area, and water flow.


    • Multilayered Structure

      Sparse Layer: Large particles are filtered to extend the filter life.

      Compaction Layer: Made with fine fiber and filters smaller particles that passed through the sparse layer.

      Precision Layer: Small dust is filtered to assure efficiency of water filtration process in the following stages.


    • High Quality Material

      iSpring sediment filters are manufactured to comply strictly with FDA standard (CFR - Part 177) and tested by independent third party against NSF/ANSI standard for material safety and water quality. (NSF/ANSI 42, by NSF International, 10/2018)


    Product Description


    REDUCTION OF SEDIMENT
    • It is usually the first filter in a water filtration system. The main function is for the reduction of sediments, such as sand, dirt, silt, rust, and various fine particles that even can't be seen by naked eyes. 100% MELT-BLOWN POLYPROPYLENE
    • Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. It is physically strong and resists to chemical and corrosion. Tested by independent third-party to meet NSF/ANSI standard
    • Genuine iSpring filter sold directly by manufacturer. WELL PACKED FOR FRESHNESS
    • Each cartridge is individually wrapped with manufacturing date Micron rating: 5 Micron Dimensions: 10 x 2.5"Capacity: 15,000 gallons Replacement schedule: 1-4 times a year, depending on the water quality"


    • Availability: In Stock
    • Model: FP15
    • Manufacturer: iSpring

    Write Review

    Note: Do not use HTML in the text.